* Licensed under the GPL v2. For licencing details see COPYING.
*/
-/** \file fd.c helper functions for file descriptor handling */
+/** \file fd.c Helper functions for file descriptor handling. */
#include <sys/types.h>
#include <dirent.h>
#include "para.h"
#include "error.h"
+
/**
- * check whether a file exists
+ * Check whether a file exists.
*
- * \param fn the file name
+ * \param fn The file name.
*
* \return Non-zero iff file exists.
*/
}
/**
- * paraslash's wrapper for select(2)
+ * Paraslash's wrapper for select(2).
*
* It calls select(2) (with no exceptfds) and starts over if select() was
* interrupted by a signal.
*
- * \param n the highest-numbered descriptor in any of the two sets, plus 1
- * \param readfds fds that should be checked for readability
- * \param writefds fds that should be checked for writablility
+ * \param n The highest-numbered descriptor in any of the two sets, plus 1.
+ * \param readfds fds that should be checked for readability.
+ * \param writefds fds that should be checked for writablility.
* \param timeout_tv upper bound on the amount of time elapsed before select()
- * returns
+ * returns.
*
- * \return The return value of the underlying select() call.
+ * \return The return value of the underlying select() call on success, the
+ * negative system error code on errors.
*
* All arguments are passed verbatim to select(2).
- * \sa select(2) select_tut(2)
+ * \sa select(2) select_tut(2).
*/
int para_select(int n, fd_set *readfds, fd_set *writefds,
struct timeval *timeout_tv)
err = errno;
} while (ret < 0 && err == EINTR);
if (ret < 0)
- PARA_CRIT_LOG("select error: %s, max_fileno: %d\n",
- strerror(err), n);
+ return -ERRNO_TO_PARA_ERROR(errno);
return ret;
}
/**
- * set a file descriptor to non-blocking mode
+ * Set a file descriptor to non-blocking mode.
*
- * \param fd The file descriptor
+ * \param fd The file descriptor.
*
- * \returns 1 on success, -E_F_GETFL, -E_F_SETFL, on errors.
+ * \return Standard.
*/
int mark_fd_nonblock(int fd)
{
int flags = fcntl(fd, F_GETFL);
if (flags < 0)
- return -E_F_GETFL;
- if (fcntl(fd, F_SETFL, ((long)flags) | O_NONBLOCK) < 0)
- return -E_F_SETFL;
+ return -ERRNO_TO_PARA_ERROR(errno);
+ flags = fcntl(fd, F_SETFL, ((long)flags) | O_NONBLOCK);
+ if (flags < 0)
+ return -ERRNO_TO_PARA_ERROR(errno);
return 1;
}
/**
- * set a file descriptor in a fd_set
+ * Set a file descriptor in a fd_set.
*
- * \param fd the file descriptor to be set
- * \param fds the file descriptor set
- * \param max_fileno highest-numbered file descriptor
+ * \param fd The file descriptor to be set.
+ * \param fds The file descriptor set.
+ * \param max_fileno Highest-numbered file descriptor.
*
* This wrapper for FD_SET() passes its first two arguments to \p FD_SET. Upon
* return, \a max_fileno contains the maximum of the old_value and \a fd.
*
- * \sa para_select
+ * \sa para_select.
*/
void para_fd_set(int fd, fd_set *fds, int *max_fileno)
{
}
/**
-* paraslash's wrapper for fgets(3)
-* \param line pointer to the buffer to store the line
-* \param size the size of the buffer given by \a line
-* \param f the stream to read from
+* Paraslash's wrapper for fgets(3).
+
+* \param line Pointer to the buffer to store the line.
+* \param size The size of the buffer given by \a line.
+* \param f The stream to read from.
*
* \return Unlike the standard fgets() function, an integer value
* is returned. On success, this function returns 1. On errors, -E_FGETS
/**
* Paraslash's wrapper for mmap.
*
- * \param length number of bytes to mmap
- * \param prot either PROT_NONE or the bitwise OR of one or more of
- * PROT_EXEC PROT_READ PROT_WRITE
- * \param flags exactly one of MAP_SHARED and MAP_PRIVATE
- * \param fd the file to mmap from
- * \param offset mmap start
+ * \param length Number of bytes to mmap.
+ * \param prot Either PROT_NONE or the bitwise OR of one or more of
+ * PROT_EXEC PROT_READ PROT_WRITE.
+ * \param flags Exactly one of MAP_SHARED and MAP_PRIVATE.
+ * \param fd The file to mmap from.
+ * \param offset Mmap start.
*
* \return This function either returns a valid pointer to the mapped area
* or calls exit() on errors.
* \param flags The usual open(2) flags.
* \param mode Specifies the permissions to use.
*
- * The mode parameter must be specified when O_CREAT is in the flags, and is ignored
- * otherwise.
+ * The mode parameter must be specified when O_CREAT is in the flags, and is
+ * ignored otherwise.
*
- * \return Positive on success, negative on errors.
+ * \return The file descriptor on success, negative on errors.
*
* \sa open(2).
*/
if (ret >= 0)
return ret;
- switch (errno) {
- case EEXIST:
- ret = -E_EXIST;
- break;
- case EISDIR:
- ret = -E_ISDIR;
- break;
- case ENOENT:
- ret = -E_NOENT;
- break;
- case EPERM:
- ret = -E_OPEN_PERM;
- break;
- };
- PARA_ERROR_LOG("failed to open %s: %s\n", path, strerror(errno));
- return -E_OPEN;
+ return -ERRNO_TO_PARA_ERROR(errno);
}
/**
* Wrapper for chdir(2).
*
- * \param path the specified directory.
+ * \param path The specified directory.
*
- * \return Positive on success, negative on errors.
+ * \return Standard.
*/
int para_chdir(const char *path)
{
if (ret >= 0)
return 1;
- switch (errno) {
- case ENOENT:
- return -E_NOENT;
- case EACCES:
- return -E_CHDIR_PERM;
- };
- return -E_CHDIR;
+ return -ERRNO_TO_PARA_ERROR(errno);
}
/**
* \param dir Result pointer.
* \param cwd File descriptor of the current working directory.
*
- * \return Positive on success, negative on errors.
+ * \return Standard.
*
* Opening the current directory (".") and calling fchdir() to return is
* usually faster and more reliable than saving cwd in some buffer and calling
ret = para_chdir(dirname);
if (ret < 0)
goto close_cwd;
- ret = -E_OPENDIR;
*dir = opendir(".");
- if (!*dir)
- goto change_to_orig_dir;
- return 1;
+ if (*dir)
+ return 1;
+ ret = -ERRNO_TO_PARA_ERROR(errno);
/* Ignore return value of fchdir() and close(). We're busted anyway. */
change_to_orig_dir:
if (cwd)
/**
* A wrapper for fchdir().
*
- * \param fd An open file descriptor
+ * \param fd An open file descriptor.
*
- * \return Positive on success, negative on errors.
+ * \return Standard.
*/
int para_fchdir(int fd)
{
if (fchdir(fd) < 0)
- return -E_FCHDIR;
+ return -ERRNO_TO_PARA_ERROR(errno);
return 1;
}
* \param path Name of the directory to create.
* \param mode The permissions to use.
*
- * \return positive on success, negative on errors.
+ * \return Standard.
*/
int para_mkdir(const char *path, mode_t mode)
{
if (!mkdir(path, mode))
return 1;
- if (errno == EEXIST)
- return -E_EXIST;
- if (errno == ENOSPC)
- return -E_NOSPC;
- if (errno == ENOTDIR)
- return -E_NOTDIR;
- if (errno == EPERM)
- return -E_MKDIR_PERM;
- return -E_MKDIR;
+ return -ERRNO_TO_PARA_ERROR(errno);
}
projects / paraslash.git / blobdiff