/*
- * Copyright (C) 2004-2009 Andre Noll <maan@systemlinux.org>
+ * Copyright (C) 2004-2013 Andre Noll <maan@systemlinux.org>
*
* Licensed under the GPL v2. For licencing details see COPYING.
*/
exit(EXIT_FAILURE);
}
+/**
+ * Print a formated message to a dynamically allocated string.
+ *
+ * \param result The formated string is returned here.
+ * \param fmt The format string.
+ * \param ap Initialized list of arguments.
+ *
+ * This function is similar to vasprintf(), a GNU extension which is not in C
+ * or POSIX. It allocates a string large enough to hold the output including
+ * the terminating null byte. The allocated string is returned via the first
+ * argument and must be freed by the caller. However, unlike vasprintf(), this
+ * function calls exit() if insufficient memory is available, while vasprintf()
+ * returns -1 in this case.
+ *
+ * \return Number of bytes written, not including the terminating \p NULL
+ * character.
+ *
+ * \sa printf(3), vsnprintf(3), va_start(3), vasprintf(3), \ref xasprintf().
+ */
+__printf_2_0 unsigned xvasprintf(char **result, const char *fmt, va_list ap)
+{
+ int ret;
+ size_t size;
+ va_list aq;
+
+ va_copy(aq, ap);
+ ret = vsnprintf(NULL, 0, fmt, aq);
+ va_end(aq);
+ assert(ret >= 0);
+ size = ret + 1;
+ *result = para_malloc(size);
+ va_copy(aq, ap);
+ ret = vsnprintf(*result, size, fmt, aq);
+ va_end(aq);
+ assert(ret >= 0 && ret < size);
+ return ret;
+}
+
+/**
+ * Print to a dynamically allocated string, variable number of arguments.
+ *
+ * \param result See \ref xvasprintf().
+ * \param fmt Usual format string.
+ *
+ * \return The return value of the underlying call to \ref xvasprintf().
+ *
+ * \sa \ref xvasprintf() and the references mentioned there.
+ */
+__printf_2_3 unsigned xasprintf(char **result, const char *fmt, ...)
+{
+ va_list ap;
+ unsigned ret;
+
+ va_start(ap, fmt);
+ ret = xvasprintf(result, fmt, ap);
+ va_end(ap);
+ return ret;
+}
+
/**
* Allocate a sufficiently large string and print into it.
*
* \return This function either returns a pointer to a string that must be
* freed by the caller or aborts without returning.
*
- * \sa printf(3).
+ * \sa printf(3), xasprintf().
*/
__must_check __printf_1_2 __malloc char *make_message(const char *fmt, ...)
{
char *msg;
+ va_list ap;
- PARA_VSPRINTF(fmt, msg);
+ va_start(ap, fmt);
+ xvasprintf(&msg, fmt, ap);
+ va_end(ap);
return msg;
}
+/**
+ * Free the content of a pointer and set it to \p NULL.
+ *
+ * This is equivalent to "free(*arg); *arg = NULL;".
+ *
+ * \param arg The pointer whose content should be freed.
+ */
+void freep(void *arg)
+{
+ void **ptr = (void **)arg;
+ free(*ptr);
+ *ptr = NULL;
+}
+
/**
* Paraslash's version of strcat().
*
}
/**
- * Used to distinguish between read-only and read-write mode.
+ * Call a custom function for each complete line.
+ *
+ * \param flags Any combination of flags defined in \ref for_each_line_flags.
+ * \param buf The buffer containing data separated by newlines.
+ * \param size The number of bytes in \a buf.
+ * \param line_handler The custom function.
+ * \param private_data Pointer passed to \a line_handler.
*
- * \sa for_each_line(), for_each_line_ro().
+ * If \p line_handler is \p NULL, the function returns the number of complete
+ * lines in \p buf.
+ *
+ * Otherwise, \p line_handler is called for each complete line in \p buf. The
+ * first argument to \p line_handler is (a copy of) the current line, and \p
+ * private_data is passed as the second argument. If the \p FELF_READ_ONLY
+ * flag is unset, a pointer into \a buf is passed to the line handler,
+ * otherwise a pointer to a copy of each line is passed instead. This copy is
+ * freed immediately after the line handler returns.
+ *
+ * The function returns if \p line_handler returns a negative value or no more
+ * lines are in the buffer. The rest of the buffer (last chunk containing an
+ * incomplete line) is moved to the beginning of the buffer if FELF_READ_ONLY is
+ * unset.
+ *
+ * \return If \p line_handler is not \p NULL and FELF_READ_ONLY is not set,
+ * this function returns the number of bytes not handled to \p line_handler,
+ * otherwise number of complete lines. On errors the negative error code of
+ * the \p line_handler is returned.
+ *
+ * \sa \ref for_each_line_flags.
*/
-enum for_each_line_modes{
- /** Activate read-only mode. */
- LINE_MODE_RO,
- /** Activate read-write mode. */
- LINE_MODE_RW
-};
-
-static int for_each_complete_line(enum for_each_line_modes mode, char *buf,
- size_t size, line_handler_t *line_handler, void *private_data)
+int for_each_line(unsigned flags, char *buf, size_t size,
+ line_handler_t *line_handler, void *private_data)
{
char *start = buf, *end;
int ret, i, num_lines = 0;
start = ++end;
continue;
}
- if (mode == LINE_MODE_RO) {
+ if (flags & FELF_READ_ONLY) {
size_t s = end - start;
char *b = para_malloc(s + 1);
memcpy(b, start, s);
return ret;
start = ++end;
}
- if (!line_handler || mode == LINE_MODE_RO)
+ if (!line_handler || (flags & FELF_READ_ONLY))
return num_lines;
i = buf + size - start;
if (i && i != size)
return i;
}
-/**
- * Call a custom function for each complete line.
- *
- * \param buf The buffer containing data separated by newlines.
- * \param size The number of bytes in \a buf.
- * \param line_handler The custom function.
- * \param private_data Pointer passed to \a line_handler.
- *
- * If \p line_handler is \p NULL, the function returns the number of complete
- * lines in \p buf. Otherwise, \p line_handler is called for each complete
- * line in \p buf. The first argument to \p line_handler is the current line,
- * and \p private_data is passed as the second argument. The function returns
- * if \p line_handler returns a negative value or no more lines are in the
- * buffer. The rest of the buffer (last chunk containing an incomplete line)
- * is moved to the beginning of the buffer.
- *
- * \return If \p line_handler is not \p NULL, this function returns the number
- * of bytes not handled to \p line_handler on success, or the negative return
- * value of the \p line_handler on errors.
- *
- * \sa for_each_line_ro().
- */
-int for_each_line(char *buf, size_t size, line_handler_t *line_handler,
- void *private_data)
-{
- return for_each_complete_line(LINE_MODE_RW, buf, size, line_handler,
- private_data);
-}
-
-/**
- * Call a custom function for each complete line.
- *
- * \param buf Same meaning as in \p for_each_line().
- * \param size Same meaning as in \p for_each_line().
- * \param line_handler Same meaning as in \p for_each_line().
- * \param private_data Same meaning as in \p for_each_line().
- *
- * This function behaves like \p for_each_line(), but \a buf is left unchanged.
- *
- * \return On success, the function returns the number of complete lines in \p
- * buf, otherwise the (negative) return value of \p line_handler is returned.
- *
- * \sa for_each_line().
- */
-int for_each_line_ro(char *buf, size_t size, line_handler_t *line_handler,
- void *private_data)
-{
- return for_each_complete_line(LINE_MODE_RO, buf, size, line_handler,
- private_data);
-}
-
+/** Return the hex characters of the lower 4 bits. */
#define hex(a) (hexchar[(a) & 15])
+
static void write_size_header(char *buf, int n)
{
static char hexchar[] = "0123456789abcdef";
buf[4] = ' ';
}
+/**
+ * Read a four-byte hex-number and return its value.
+ *
+ * Each status item sent by para_server is prefixed with such a hex number in
+ * ASCII which describes the size of the status item.
+ *
+ * \param buf The buffer which must be at least four bytes long.
+ *
+ * \return The value of the hex number on success, \p -E_SIZE_PREFIX if the
+ * buffer did not contain only hex digits.
+ */
int read_size_header(const char *buf)
{
int i, len = 0;
}
}
-/** \cond LLONG_MAX and LLONG_LIN might not be defined. */
+/** \cond llong_minmax */
+/* LLONG_MAX and LLONG_MIN might not be defined. */
#ifndef LLONG_MAX
-#define LLONG_MAX (1 << (sizeof(long) - 1))
+#define LLONG_MAX 9223372036854775807LL
#endif
#ifndef LLONG_MIN
#define LLONG_MIN (-LLONG_MAX - 1LL)
#endif
-/** \endcond */
+/** \endcond llong_minmax */
/**
* Convert a string to a 64-bit signed integer value.
return -1;
}
-static int get_next_word(const char *buf, const char *delim, char **word)
+static int get_next_word(const char *buf, const char *delim, char **word)
{
enum line_state_flags {LSF_HAVE_WORD = 1, LSF_BACKSLASH = 2,
LSF_SINGLE_QUOTE = 4, LSF_DOUBLE_QUOTE = 8};
}
/**
- * Free an array of words created by create_argv().
+ * Get the number of the word the cursor is on.
+ *
+ * \param buf The zero-terminated line buffer.
+ * \param delim Characters that separate words.
+ * \param point The cursor position.
+ *
+ * \return Zero-based word number.
+ */
+int compute_word_num(const char *buf, const char *delim, int point)
+{
+ int ret, num_words;
+ const char *p;
+ char *word;
+
+ for (p = buf, num_words = 0; ; p += ret, num_words++) {
+ ret = get_next_word(p, delim, &word);
+ if (ret <= 0)
+ break;
+ free(word);
+ if (p + ret >= buf + point)
+ break;
+ }
+ return num_words;
+}
+
+/**
+ * Free an array of words created by create_argv() or create_shifted_argv().
*
* \param argv A pointer previously obtained by \ref create_argv().
*/
{
int i;
+ if (!argv)
+ return;
for (i = 0; argv[i]; i++)
free(argv[i]);
free(argv);
}
+static int create_argv_offset(int offset, const char *buf, const char *delim,
+ char ***result)
+{
+ char *word, **argv = para_malloc((offset + 1) * sizeof(char *));
+ const char *p;
+ int i, ret;
+
+ for (i = 0; i < offset; i++)
+ argv[i] = NULL;
+ for (p = buf; p && *p; p += ret, i++) {
+ ret = get_next_word(p, delim, &word);
+ if (ret < 0)
+ goto err;
+ if (!ret)
+ break;
+ argv = para_realloc(argv, (i + 2) * sizeof(char*));
+ argv[i] = word;
+ }
+ argv[i] = NULL;
+ *result = argv;
+ return i;
+err:
+ while (i > 0)
+ free(argv[--i]);
+ free(argv);
+ *result = NULL;
+ return ret;
+}
+
/**
* Split a buffer into words.
*
*/
int create_argv(const char *buf, const char *delim, char ***result)
{
- char *word, **argv = para_malloc(2 * sizeof(char *));
- const char *p;
- int ret, num_words;
+ return create_argv_offset(0, buf, delim, result);
+}
- for (p = buf, num_words = 0; ; p += ret, num_words++) {
- ret = get_next_word(p, delim, &word);
- if (ret < 0)
- goto err;
- if (!ret)
- break;
- argv = para_realloc(argv, (num_words + 2) * sizeof(char*));
- argv[num_words] = word;
- }
- argv[num_words] = NULL;
- *result = argv;
- return num_words;
-err:
- while (num_words > 0)
- free(argv[--num_words]);
- free(argv);
- return ret;
+/**
+ * Split a buffer into words, offset one.
+ *
+ * This is similar to \ref create_argv() but the returned array is one element
+ * larger, words start at index one and element zero is initialized to \p NULL.
+ * Callers must set element zero to a non-NULL value before calling free_argv()
+ * on the returned array to avoid a memory leak.
+ *
+ * \param buf See \ref create_argv().
+ * \param delim See \ref create_argv().
+ * \param result See \ref create_argv().
+ *
+ * \return Number of words plus one on success, negative on errors.
+ */
+int create_shifted_argv(const char *buf, const char *delim, char ***result)
+{
+ return create_argv_offset(1, buf, delim, result);
+}
+
+/**
+ * Find out if the given string is contained in the arg vector.
+ *
+ * \param arg The string to look for.
+ * \param argv The array to search.
+ *
+ * \return The first index whose value equals \a arg, or \p -E_ARG_NOT_FOUND if
+ * arg was not found in \a argv.
+ */
+int find_arg(const char *arg, char **argv)
+{
+ int i;
+
+ if (!argv)
+ return -E_ARG_NOT_FOUND;
+ for (i = 0; argv[i]; i++)
+ if (strcmp(arg, argv[i]) == 0)
+ return i;
+ return -E_ARG_NOT_FOUND;
}
+/**
+ * Compile a regular expression.
+ *
+ * This simple wrapper calls regcomp() and logs a message on errors.
+ *
+ * \param preg See regcomp(3).
+ * \param regex See regcomp(3).
+ * \param cflags See regcomp(3).
+ *
+ * \return Standard.
+ */
int para_regcomp(regex_t *preg, const char *regex, int cflags)
{
char *buf;
free(buf);
return -E_REGEX;
}
+
+/**
+ * strdup() for not necessarily zero-terminated strings.
+ *
+ * \param src The source buffer.
+ * \param len The number of bytes to be copied.
+ *
+ * \return A 0-terminated buffer of length \a len + 1.
+ *
+ * This is similar to strndup(), which is a GNU extension. However, one
+ * difference is that strndup() returns \p NULL if insufficient memory was
+ * available while this function aborts in this case.
+ *
+ * \sa strdup(), \ref para_strdup().
+ */
+char *safe_strdup(const char *src, size_t len)
+{
+ char *p;
+
+ assert(len < (size_t)-1);
+ p = para_malloc(len + 1);
+ if (len > 0)
+ memcpy(p, src, len);
+ p[len] = '\0';
+ return p;
+}
+
+/**
+ * Copy the value of a key=value pair.
+ *
+ * This checks whether the given buffer starts with "key=", ignoring case. If
+ * yes, a copy of the value is returned. The source buffer may not be
+ * zero-terminated.
+ *
+ * \param src The source buffer.
+ * \param len The number of bytes of the tag.
+ * \param key Only copy if it is the value of this key.
+ *
+ * \return A zero-terminated buffer, or \p NULL if the key was
+ * not of the given type.
+ */
+char *key_value_copy(const char *src, size_t len, const char *key)
+{
+ int keylen = strlen(key);
+
+ if (len <= keylen)
+ return NULL;
+ if (strncasecmp(src, key, keylen))
+ return NULL;
+ if (src[keylen] != '=')
+ return NULL;
+ return safe_strdup(src + keylen + 1, len - keylen - 1);
+}
projects / paraslash.git / blobdiff