1 **Paraslash user manual**
3 This document describes how to install, configure and use the paraslash
4 network audio streaming system. Most chapters start with a chapter
5 overview and conclude with an example section. We try to focus on
6 general concepts and on the interaction of the various pieces of the
7 paraslash package. Hence this user manual is not meant as a replacement
8 for the manual pages that describe all command line options of each
15 In this chapter we give an [overview](#Overview) of the interactions
16 of the programs contained in the paraslash package, followed by
17 [brief descriptions](#The.paraslash.executables) of all executables.
22 The core functionality of the para suite is provided by two main
23 applications, para_server and para_audiod. para_server maintains
24 the audio file database and acts as the streaming source, while
25 para_audiod is the streaming client. Usually, both run in the
26 background on different hosts but a local setup is also possible.
28 A simplified picture of a typical setup is as follows
31 .____________________.
33 .-----------------------. | .d########b. |
34 |.---------------------.| | .d############b |
35 || || | .d######""####//b. |
36 || || | 9######( )######P |
37 || || | 'b######++######d' |
38 || Screen || | "9############P" |
39 || || | "9a########P" |
41 |`---------------------'| | ________________ |
42 `-----------------------' | |________________| |
43 ___) (___ |____________________|
44 `-._______.-' loudspeaker
48 .____/ \___. ._____________. ._____/ \_____.
50 | para_gui |-----| para_audioc |-----| para_audiod |
51 |____ ___| |_____________| |_____ _____|
56 ._____/ \_____. ._____/ \_____.
58 | para_client |-----------------------| para_server |
59 |_____________| |_____ _____|
72 The two client programs, para_client and para_audioc communicate with
73 para_server and para_audiod, respectively.
75 para_gui controls para_server and para_audiod by executing para_client
76 and para_audioc. In particular, it runs a command to obtain the state
77 of para_audiod and para_server, and the metadata of the current audio
78 file. This information is pretty-printed in a curses window.
80 The paraslash executables
81 -------------------------
83 <h3> para_server </h3>
85 para_server streams binary audio data (MP3, ...) over local and/or
86 remote networks. It listens on a TCP port and accepts commands such
87 as play, stop, pause, next from authenticated clients. The components
88 of para_server are illustrated in the following diagram:
90 ______________________________________________________________________ network
94 .____/ \_____. |`-.____.-'| .____/ \____/ \____/ \____. |
96 | dispatcher | | database | | senders (http/udp/dccp) | |
97 |____ _____| | | |___________ ___________| |
98 \ / |. ' "" ` .| \ / |
104 | ._____/ \_____. .________/ \________. |
106 | | audio file |________| virtual streaming | |
107 | | selector | | system | |
108 | |_____ _____| |________ ________| |
112 | | ._________________. | |
114 | `---| command handler |---' |
120 `-------------------------' `--------------------------'
123 Incoming connections arrive at the dispatcher which creates a process
124 dedicated to the connection. Its task is to authenticate the client
125 and to run the command handler which forwards the client request to
126 either the audio file selector or the virtual streaming system. Results
127 (if any) are sent back to the client.
129 The audio file selector manages audio files using various database
130 tables. It maintains statistics on the usage of all audio files such as
131 last-played time and the number of times each file was selected. It
132 is also responsible for selecting and loading audio files for
133 streaming. Additional information may be added to the database to allow
134 fine-grained selection based on various properties of the audio file,
135 including information found in (ID3) tags. Simple playlists are also
136 supported. It is possible to store images (album covers) and lyrics
137 in the database and associate these to the corresponding audio files.
138 The section on the [audio file selector](#The.audio.file.selector)
139 discusses this topic in more detail.
141 Another component of para_server is the virtual streaming system,
142 which controls the paraslash senders. During streaming it requests
143 small chunks of data (e.g., mp3 frames) from the audio file selector
144 and feeds them to the senders which forward the chunks to connected
147 The three senders of para_server correspond to network streaming
148 protocols based on HTTP, DCCP, or UDP. This is explained in the
149 section on [networking](#Networking).
151 <h3> para_client </h3>
153 The client program to connect to para_server. paraslash commands
154 are sent to para_server and the response is dumped to STDOUT. This
155 can be used by any scripting language to produce user interfaces with
156 little programming effort.
158 All connections between para_server and para_client are encrypted
159 with a symmetric session key. For each user of paraslash you must
160 create a public/secret RSA key pair for authentication.
162 If para_client is started without non-option arguments, an interactive
163 session (shell) is started. Command history and command completion are
164 supported through libreadline.
166 <h3> para_audiod </h3>
168 The purpose of para_audiod is to download, decode and play an audio
169 stream received from para_server. A typical setup looks as follows.
172 .----------------------------.
175 ._____/ \_____. .___/ \____.
177 | para_server | | .______| receiver |
178 |_____ ____| | | |___ ____|
183 ._____/ \_____. | | .___/ \____.
185 | status task |-----+ | | filter 1 |
186 |_____________| | |___ ____|
188 | | .____________________.
190 .____________. | .___/ \____. | .d########b. |
191 | | | | | | .d############b |
192 | dispatcher |----------' | filter 2 | | .d######""####//b. |
193 |_____ ____| |___ ____| | 9######( )######P |
194 \ / \ / | 'b######++######d' |
195 | | | "9############P" |
196 | | | "9a########P" |
197 ._____/ \_____. .___/ \____. | `""""'' |
198 | | | | | ________________ |
199 | para_audioc | | writer |------| |________________| |
200 |_____________| |__________| |____________________|
203 The status task of para_audiod connects to para_server and runs the
204 "stat" command to retrieve the current server status. If an audio
205 stream is available, para_audiod starts a so-called buffer tree to
208 The buffer tree consists of a receiver, any number of filters and a
209 writer. The receiver downloads the audio stream from para_server and
210 the filters decode or modify the received data. The writer plays the
213 The dispatcher of para_audiod listens on a local socket and runs
214 audiod commands on behalf of para_audioc. For example, para_gui runs
215 para_audioc to obtain status information about para_audiod and the
216 current audio file. Access to the local socket may be restricted by
217 means of Unix socket credentials.
219 <h3> para_audioc </h3>
221 The client program which talks to para_audiod. Used to control
222 para_audiod, to receive status info, or to grab the stream at any
223 point of the decoding process. Like para_client, para_audioc supports
224 interactive sessions on systems with libreadline.
228 A command line HTTP/DCCP/UDP stream grabber. The http mode is
229 compatible with arbitrary HTTP streaming sources (e.g. icecast).
230 In addition to the three network streaming modes, para_recv can also
231 operate in local (afh) mode. In this mode it writes the content of
232 an audio file on the local file system in complete chunks to stdout,
233 optionally 'just in time'. This allows cutting audio files without
234 decoding, and it enables third-party software which is unaware of
235 the particular audio format to send complete frames in real time.
237 <h3> para_filter </h3>
239 A filter program that reads from STDIN and writes to STDOUT.
240 Like para_recv, this is an atomic building block which can be used to
241 assemble higher-level audio receiving facilities. It combines several
242 different functionalities in one tool: decoders for multiple audio
243 formats and a number of processing filters, among these a normalizer
248 A small stand-alone program that prints tech info about the given
249 audio file to STDOUT. It can be instructed to print a "chunk table",
250 an array of offsets within the audio file.
252 <h3> para_write </h3>
254 A modular audio stream writer. It supports a simple file writer
255 output plug-in and optional WAV/raw players for ALSA (Linux) and OSS.
256 para_write can also be used as a stand-alone WAV or raw audio player.
260 A command line audio player which supports the same audio formats as
261 para_server. It differs from other players in that it has an insert
262 and a command mode, like the vi editor. Line editing is based on
263 libreadline, and tab completion and command history are supported.
267 Curses-based gui that presents status information obtained in a curses
268 window. Appearance can be customized via themes. para_gui provides
269 key-bindings for the most common server commands and new key-bindings
272 <h3> para_mixer </h3>
274 An alarm clock and volume-fader for OSS and ALSA.
280 This chapter lists the [necessary software](#Requirements)
281 that must be installed to compile the paraslash package, describes
282 how to [compile and install](#Installation) the paraslash
283 source code and the steps that have to be performed in order to
284 [set up](#Configuration) a typical server and client.
288 <h3> For the impatient </h3>
290 git clone git://git.tuebingen.mpg.de/lopsub
291 cd lopsub && make && sudo make install
292 git clone git://git.tuebingen.mpg.de/osl
293 cd osl && make && sudo make install && sudo ldconfig
294 sudo apt-get install autoconf libssl-dev m4 \
295 libmad0-dev libid3tag0-dev libasound2-dev libvorbis-dev \
296 libfaad-dev libspeex-dev libflac-dev libsamplerate-dev \
297 libasound2-dev libao-dev libreadline-dev libncurses-dev \
300 <h3> Detailed description </h3>
302 In any case you will need
304 - [lopsub](http://people.tuebingen.mpg.de/maan/lopsub/). The long
305 option parser for subcommands generates the command line and config
306 file parsers for all paraslash executables. Clone the source code
309 git clone git://git.tuebingen.mpg.de/lopsub
311 - [gcc](ftp://ftp.gnu.org/pub/gnu/gcc) or
312 [clang](http://clang.llvm.org). All gcc versions >= 4.2 are currently
313 supported. Clang version 1.1 or newer should work as well.
315 - [gnu make](ftp://ftp.gnu.org/pub/gnu/make) is also shipped with the
316 disto. On BSD systems the gnu make executable is often called gmake.
318 - [bash](ftp://ftp.gnu.org/pub/gnu/bash). Some scripts which run
319 during compilation require the _Bourne again shell_. It is most
320 likely already installed.
322 - [m4](ftp://ftp.gnu.org/pub/gnu/m4/). Some source files are generated
323 from templates by the m4 macro processor.
327 - [libosl](http://people.tuebingen.mpg.de/maan/osl/). The _object
328 storage layer_ library is used by para_server. To clone the source
329 code repository, execute
331 git clone git://git.tuebingen.mpg.de/osl
333 - [openssl](https://www.openssl.org/) or
334 [libgcrypt](ftp://ftp.gnupg.org/gcrypt/libgcrypt/). At least one
335 of these two libraries is needed as the backend for cryptographic
336 routines on both the server and the client side. Both openssl and
337 libgcrypt are usually shipped with the distro, but you might have
338 to install the development package (`libssl-dev` or `libgcrypt-dev`
339 on debian systems) as well.
341 - [flex](https://github.com/westes/flex) and
342 [bison](https://www.gnu.org/software/bison) are needed to build the
343 mood parser of para_server. The build system will skip para_server
344 if these tools are not installed.
346 - [libmad](http://www.underbit.com/products/mad/). To compile in MP3
347 support for paraslash, the development package must be installed. It
348 is called `libmad0-dev` on debian-based systems. Note that libmad is
349 not necessary on the server side, i.e., for sending MP3 files.
351 - [libid3tag](http://www.underbit.com/products/mad/). For version-2
352 ID3 tag support, you will need the libid3tag development package
353 `libid3tag0-dev`. Without libid3tag, only version-1 tags are
354 recognized. The mp3 tagger also needs this library for modifying
355 (id3v1 and id3v2) tags.
357 - [ogg vorbis](https://www.xiph.org/downloads/). For ogg vorbis streams
358 you need libogg, libvorbis, libvorbisfile. The corresponding Debian
359 packages are called `libogg-dev` and `libvorbis-dev`.
361 - [libfaad and mp4ff](https://sourceforge.net/projects/faac/). For aac files
362 (m4a) you need libfaad and libmp4ff (package: `libfaad-dev`). Note
363 that for some distributions, e.g. Ubuntu, mp4ff is not part of the
364 libfaad package. Install the faad library from sources (available
365 through the above link) to get the mp4ff library and header files.
367 - [speex](https://www.speex.org/). In order to stream or decode speex
368 files, libspeex (`libspeex-dev`) is required.
370 - [flac](https://xiph.org/flac/). To stream or decode files
371 encoded with the _Free Lossless Audio Codec_, libFLAC (`libFLAC-dev`)
374 - [libsamplerate](http://www.mega-nerd.com/SRC/index.html). The
375 resample filter will only be compiled if this library is
376 installed. Debian package: `libsamplerate-dev`.
378 - [alsa-lib](ftp://ftp.alsa-project.org/pub/lib/). On Linux, you will
379 need to have the ALSA development package `libasound2-dev` installed.
381 - [libao](https://ftp.osuosl.org/pub/xiph/releases/ao/). Needed to build
382 the ao writer (ESD, PulseAudio,...). Debian package: `libao-dev`.
384 - [curses](ftp://ftp.gnu.org/pub/gnu/ncurses). Needed for
385 para_gui. Debian package: `libncurses-dev`.
388 Readline](http://cnswww.cns.cwru.edu/php/chet/readline/rltop.html). If
389 this library (`libreadline-dev`) is installed, para_client, para_audioc
390 and para_play support interactive sessions.
394 To build the sources from a tarball, execute
398 To build from git or a gitweb snapshot, run this command instead:
402 There should be no errors but probably some warnings about missing
403 packages which usually implies that not all audio formats will be
404 supported. If headers or libs are installed at unusual locations you
405 might need to tell the configure script where to find them. Try
409 to see a list of options. If the paraslash package was compiled
410 successfully, execute (optionally)
414 to run the paraslash test suite. If all tests pass, execute as root
418 to install executables under /usr/local/bin and the man pages under
424 <h3> Create a paraslash user </h3>
426 In order to control para_server at runtime you must create a paraslash
427 user. As authentication is based on the RSA crypto system you'll have
428 to create an RSA key pair. If you already have a user and an RSA key
429 pair, you may skip this step.
431 In this section we'll assume a typical setup: You would like to run
432 para_server on some host called server_host as user foo, and you want
433 to connect to para_server from another machine called client_host as
436 As foo@server_host, create ~/.paraslash/server.users by typing the
440 target=~/.paraslash/server.users
441 key=~/.paraslash/id_rsa.pub.$user
442 perms=AFS_READ,AFS_WRITE,VSS_READ,VSS_WRITE
443 mkdir -p ~/.paraslash
444 echo "user $user $key $perms" >> $target
446 Next, change to the "bar" account on client_host and generate the
447 key pair with the commands
449 ssh-keygen -q -t rsa -b 2048 -N '' -m RFC4716
451 This generates the two files id_rsa and id_rsa.pub in ~/.ssh. Note
452 that para_server won't accept keys shorter than 2048 bits. Moreover,
453 para_client rejects private keys which are world-readable.
455 para_server only needs to know the public key of the key pair just
456 created. Copy this public key to server_host:
458 src=~/.ssh/id_rsa.pub
459 dest=.paraslash/id_rsa.pub.$LOGNAME
460 scp $src foo@server_host:$dest
462 Finally, tell para_client to connect to server_host:
464 conf=~/.paraslash/client.conf
465 echo 'hostname server_host' > $conf
468 <h3> Start para_server </h3>
470 For this first try, we'll use the info loglevel to make the output
471 of para_server more verbose.
475 Now you can use para_client to connect to the server and issue
476 commands. Open a new shell as bar@client_host and try
481 to retrieve the list of available commands and some server info.
482 Don't proceed if this doesn't work.
484 <h3> Create and populate the database </h3>
486 An empty database is created with
490 This initializes a couple of empty tables under
491 ~/.paraslash/afs_database-0.4. You normally don't need to look at these
492 tables, but it's good to know that you can start from scratch with
494 rm -rf ~/.paraslash/afs_database-0.4
496 in case something went wrong.
498 Next, you need to add some audio files to that database so that
499 para_server knows about them. Choose an absolute path to a directory
500 containing some audio files and add them to the audio file table:
502 para_client add /my/mp3/dir
504 This might take a while, so it is a good idea to start with a directory
505 containing not too many files. Note that the table only contains data
506 about the audio files found, not the files themselves.
508 You may print the list of all known audio files with
512 <h3> Configure para_audiod </h3>
514 We will have to tell para_audiod that it should receive the audio
515 stream from server_host via http:
517 para_audiod -l info -r '.:http -i server_host'
519 You should now be able to listen to the audio stream once para_server
520 starts streaming. To activate streaming, execute
524 Since no playlist has been specified yet, the "dummy" mode which
525 selects all known audio files is activated automatically. See the
526 section on the [audio file selector](#The.audio.file.selector) for how
527 to use playlists and moods to specify which files should be streamed
533 To identify streaming problems try to receive, decode and play the
534 stream manually using para_recv, para_filter and para_write as follows.
535 For simplicity we assume that you're running Linux/ALSA and that only
536 MP3 files have been added to the database.
538 para_recv -r 'http -i server_host' > file.mp3
539 # (interrupt with CTRL+C after a few seconds)
540 ls -l file.mp3 # should not be empty
541 para_filter -f mp3dec -f wav < file.mp3 > file.wav
542 ls -l file.wav # should be much bigger than file.mp3
543 para_write -w alsa < file.wav
545 Double check what is logged by para_server and use the --loglevel
546 option of para_recv, para_filter and para_write to increase verbosity.
552 para_server uses a challenge-response mechanism to authenticate
553 requests from incoming connections, similar to ssh's public key
554 authentication method. Authenticated connections are encrypted using
555 the AES stream cipher in integer counter mode.
557 In this chapter we briefly describe RSA and AES, and sketch the
558 [authentication handshake](#Client-server.authentication)
559 between para_client and para_server. User management is discussed
560 in the section on [the user_list file](#The.user_list.file).
561 These sections are all about communication between the client and the
562 server. Connecting para_audiod is a different matter and is described
563 in a [separate section](#Connecting.para_audiod).
568 A block cipher is a transformation which operates on fixed-length
569 blocks. For symmetric block ciphers the transformation is determined
570 by a single key for both encryption and decryption. For asymmetric
571 block ciphers, on the other hand, the key consists of two parts,
572 called the public key and the private key. A message can be encrypted
573 with either key and only the counterpart of that key can decrypt the
574 message. Asymmetric block ciphers can be used for both signing and
575 encrypting a message.
577 RSA is an asymmetric block cipher which is used in many applications,
578 including ssh and gpg. The RSA public key encryption and signatures
579 algorithms are defined in detail in RFC 2437. Paraslash relies on
580 RSA for authentication.
582 Stream ciphers XOR the input with a pseudo-random key stream to produce
583 the output. Decryption uses the same function calls as encryption.
584 Any block cipher can be turned into a stream cipher by generating the
585 pseudo-random key stream by encrypting successive values of a counter
588 AES, the advanced encryption standard, is a well-known symmetric block
589 cipher. Paraslash employs AES in counter mode as described above to
590 encrypt communications. Since a stream cipher key must not be used
591 twice, a random key is generated for every new connection.
593 Client-server authentication
594 ----------------------------
596 The authentication handshake between para_client and para_server goes
599 - para_client connects to para_server and sends an authentication
600 request for a user. It does so by connecting to TCP port 2990 of the
601 server host. This port is called the para_server _control port_.
603 - para_server accepts the connection and forks a child process which
604 handles the incoming request. The parent process keeps listening on the
605 control port while the child process (also called para_server below)
606 continues as follows.
608 - para_server loads the RSA public key of that user, fills a
609 fixed-length buffer with random bytes, encrypts that buffer using the
610 public key and sends the encrypted buffer to the client. The first
611 part of the buffer is the challenge which is used for authentication
612 while the second part is the session key.
614 - para_client receives the encrypted buffer and decrypts it with the
615 user's private key, thereby obtaining the challenge buffer and the
616 session key. It sends the SHA1 hash value of the challenge back to
617 para_server and stores the session key for further use.
619 - para_server also computes the SHA1 hash of the challenge and compares
620 it against what was sent back by the client.
622 - If the two hashes do not match, the authentication has failed and
623 para_server closes the connection.
625 - Otherwise the user is considered authenticated and the client is
626 allowed to proceed by sending a command to be executed. From this
627 point on the communication is encrypted using the stream cipher with
628 the session key known to both peers.
630 paraslash relies on the quality of the pseudo-random bytes provided
631 by the crypto library (openssl or libgcrypt), on the security of
632 the implementation of the RSA and AES crypto routines and on the
633 infeasibility to invert the SHA1 function.
635 Neither para_server or para_client create RSA keys on their
636 own. This has to be done once for each user as sketched in
637 [Quick start](#Quick.start) and discussed in more detail
638 [below](#The.user_list.file).
643 At startup para_server reads the user list file which contains one
644 line per user. The default location of the user list file may be
645 changed with the --user-list option.
647 There should be at least one user in this file. Each user must have
648 an RSA key pair. The public part of the key is needed by para_server
649 while the private key is needed by para_client. Each line of the
650 user list file must be of the form
652 user <username> <key> <perms>
654 where _username_ is an arbitrary string (usually the user's login
655 name), _key_ is the full path to that user's public RSA key, and
656 _perms_ is a comma-separated list of zero or more of the following
659 +---------------------------------------------------------+
660 | AFS_READ | read the contents of the databases |
661 +-----------+---------------------------------------------+
662 | AFS_WRITE | change database contents |
663 +-----------+---------------------------------------------+
664 | VSS_READ | obtain information about the current stream |
665 +-----------+---------------------------------------------+
666 | VSS_WRITE | change the current stream |
667 +---------------------------------------------------------+
669 The permission bits specify which commands the user is allowed to
670 execute. The output of
674 contains the permissions needed to execute the command.
676 It is possible to make para_server reread the user_list file by
677 executing the paraslash "hup" command or by sending SIGHUP to the
680 Connecting para_audiod
681 ----------------------
683 para_audiod listens on a Unix domain socket. Those sockets are
684 for local communication only, so only local users can connect to
685 para_audiod. The default is to let any user connect but this can be
686 restricted on platforms that support UNIX socket credentials which
687 allow para_audiod to obtain the Unix credentials of the connecting
690 Use para_audiod's --user-allow option to allow connections only for
691 a limited set of users.
693 =======================
694 The audio file selector
695 =======================
697 paraslash comes with a sophisticated audio file selector (AFS),
698 whose main task is to determine which file to stream next, based on
699 information on the audio files stored in a database. It communicates
700 also with para_client via the command handler whenever an AFS command
701 is executed, for example to answer a database query.
703 Besides the simple playlists, AFS supports audio file selection
704 based on _moods_ which act as a filter that limits the set of all
705 known audio files to those which satisfy certain criteria. It also
706 maintains tables containing images (e.g. album cover art) and lyrics
707 that can be associated with one or more audio files.
709 In this chapter we sketch the setup of the [AFS
710 process](#The.AFS.process) during server startup and proceed with the
711 description of the [layout](#Database.layout) of the various database
712 tables. The section on [playlists and moods](#Playlists.and.moods)
713 explains these two audio file selection mechanisms in detail
714 and contains practical examples. The way [file renames and content
715 changes](#File.renames.and.content.changes) are detected is discussed
716 briefly before the [Troubleshooting](#Troubleshooting) section
717 concludes the chapter.
722 On startup, para_server forks to create the AFS process which opens
723 the database tables. The AFS process accepts incoming connections
724 which arrive either on a pipe which is shared with para_server,
725 or on the local socket it is listening on. The setup is as follows.
727 .___________________. .______________.
729 | virtual streaming | | audio format |
730 | system | | handler |
731 |_________ _______| |_____ ______|
734 .-'""""`-. | | .-'""""`-.
736 |`-.____.-'| .__/ \________________/ \___. |`-.____.-'|
738 | file |----| AFS (audio file selector) |----| OSL |
739 | system | | process | | database |
740 | | |___________________________| | |
741 |. ' "" ` .| | |. ' "" ` .|
743 `-.____.-' | `-.____.-'
757 The virtual streaming system, which is part of the server process,
758 communicates with the AFS process via pipes and shared memory. When
759 the current audio file changes, it sends a notification through the
760 shared pipe. The AFS process queries the database to determine the
761 next audio file, opens it, verifies that it has not been changed since
762 it was added to the database and passes the open file descriptor back
763 to the virtual streaming system, along with audio file meta-data such
764 as file name, duration, audio format and so on. The virtual streaming
765 system then starts to stream the file.
767 The command handlers of all AFS server commands use the local socket
768 to query or update the database. For example, the command handler of
769 the add command sends the path of an audio file to the local socket.
770 The AFS process opens the file and tries to find an audio format
771 handler which recognizes the file. If all goes well, a new database
772 entry with metadata obtained from the audio format handler is added
775 Note that AFS employs
776 [libosl](http://people.tuebingen.mpg.de/maan/osl/), the object
777 storage layer library, as the database backend. This library offers
778 functionality similar to a relational database, but is much more
779 lightweight than a full featured database management system.
784 Metadata about the known audio files is stored in an OSL database. This
785 database consists of the following tables:
787 - The audio file table contains path, hash and metadata of each
790 - The "attributes" table maps each of the 64 possible attributes to a
793 - The "blob" tables store images, lyrics, moods, playlists. All of
796 - The "score" table describes the subset of admissible files for the
797 current playlist or mood.
799 All tables are described in more detail below.
801 <h3> The audio file table </h3>
803 This is the most important and usually also the largest table of the
804 AFS database. It contains the information needed to stream each audio
805 file. In particular the following data is stored for each audio file.
807 - SHA1 hash value of the audio file contents. This is computed once
808 when the file is added to the database. Whenever AFS selects this
809 audio file for streaming the hash value is recomputed and checked
810 against the value stored in the database to detect content changes.
812 - The time when this audio file was last played.
814 - The number of times the file has been played so far.
816 - The attribute bitmask.
818 - The image id which describes the image associated with this audio
821 - The lyrics id which describes the lyrics associated with this
824 - The audio format id (MP3, OGG, ...).
826 - An amplification value that can be used by the amplification filter
827 to pre-amplify the decoded audio stream.
829 - The chunk table. It describes the location and the timing of the
830 building blocks of the audio file. This is used by para_server to
831 send chunks of the file at appropriate times.
833 - The duration of the audio file.
835 - Tag information contained in the audio file (ID3 tags, Vorbis
838 - The number of channels
840 - The encoding bitrate.
842 - The sampling frequency.
844 To add or refresh the data contained in the audio file table, the _add_
845 command is used. It takes the full path of either an audio file or a
846 directory. In the latter case, the directory is traversed recursively
847 and all files which are recognized as valid audio files are added to
850 <h3> The attribute table </h3>
852 The attribute table contains two columns, _name_ and _bitnum_. An
853 attribute is simply a name for a certain bit number in the attribute
854 bitmask of the audio file table.
856 Each of the 64 bits of the attribute bitmask can be set for each
857 audio file individually. Hence up to 64 different attributes may be
858 defined. For example, "pop", "rock", "blues", "jazz", "instrumental",
859 "german_lyrics", "speech", whatever. You are free to choose as
860 many attributes as you like and there are no naming restrictions
863 A new attribute "test" is created by
865 para_client addatt test
869 lists all available attributes. You can set the "test" attribute for
870 an audio file by executing
872 para_client setatt test+ /path/to/the/audio/file
874 Similarly, the "test" bit can be removed from an audio file with
876 para_client setatt test- /path/to/the/audio/file
878 Instead of a path you may use a shell wildcard pattern. The attribute
879 is applied to all audio files matching this pattern:
881 para_client setatt test+ '/test/directory/*'
885 para_client -- ls -l=v
887 gives you a verbose listing of your audio files also showing which
890 In case you wonder why the double-dash in the above command is needed:
891 It tells para_client to not interpret the options after the dashes. If
892 you find this annoying, just say
894 alias para='para_client --'
896 and be happy. In what follows we shall use this alias.
898 The "test" attribute can be dropped from the database with
907 for more information and a complete list of command line options to
910 <h3> Blob tables </h3>
912 The image, lyrics, moods and playlists tables are all blob tables.
913 Blob tables consist of three columns each: The identifier which is
914 a positive number that is auto-incremented, the name (an arbitrary
915 string) and the content (the blob).
917 All blob tables support the same set of actions: cat, ls, mv, rm
918 and add. Of course, _add_ is used for adding new blobs to the table
919 while the other actions have the same meaning as the corresponding
920 Unix commands. The paraslash commands to perform these actions are
921 constructed as the concatenation of the table name and the action. For
922 example addimg, catimg, lsimg, mvimg, rmimg are the commands that
923 manipulate or query the image table.
925 The add variant of these commands is special as these commands read
926 the blob contents from stdin. To add an image to the image table the
929 para addimg image_name < file.jpg
933 Note that the images and lyrics are not interpreted at all, and also
934 the playlist and the mood blobs are only investigated when the mood
935 or playlist is activated with the select command.
937 <h3> The score table </h3>
939 The score table describes those audio files which are admissible for
940 the current mood or playlist (see below). The table has two columns:
941 a pointer to a row of the audio file table and a score value.
943 Unlike all other tables of the database, the score table remains in
944 memory and is never stored on disk. It is initialized at startup and
945 recomputed when the select command loads a new mood or playlist.
947 When the audio file selector is asked to open the next audio file,
948 it picks the row with the highest score, opens the corresponding
949 file and passes the file descriptor to the virtual streaming system.
950 At this point the last_played and the num_played fields of the selected
951 file are updated and the score is recomputed.
956 Playlists and moods offer two different ways of specifying the set of
957 admissible files. A playlist in itself describes a set of admissible
958 files. A mood, in contrast, describes the set of admissible files in
959 terms of attributes and other type of information available in the
960 audio file table. As an example, a mood can define a filename pattern,
961 which is then matched against the names of audio files in the table.
965 Playlists are accommodated in the playlist table of the afs database,
966 using the aforementioned blob format for tables. A new playlist is
967 created with the addpl command by specifying the full (absolute)
968 paths of all desired audio files, separated by newlines. Example:
970 find /my/mp3/dir -name "*.mp3" | para addpl my_playlist
972 If _my_playlist_ already exists it is overwritten. To activate the
973 new playlist, execute
975 para select p/my_playlist
977 The audio file selector will assign scores to each entry of the list,
978 in descending order so that files will be selected in order. If a
979 file could not be opened for streaming, its entry is removed from
980 the score table (but not from the playlist).
984 A mood consists of a unique name and a definition. The definition
985 is an expression which describes which audio files are considered
986 admissible. At any time at most one mood can be active, meaning
987 that para_server will only stream files which are admissible for the
990 The expression may refer to attributes and other metadata stored in
991 the database. Expressions may be combined by means of logical and
992 arithmetical operators in a natural way. Moreover, string matching
993 based on regular expression or wildcard patterns is supported.
995 The set of admissible files is determined by applying the expression
996 to each audio file in turn. For a mood definition to be valid, its
997 expression must evaluate to a number, a string or a boolean value
998 ("true" or "false"). For numbers, any value other than zero means the
999 file is admissible. For strings, any non-empty string indicates an
1000 admissible file. For boolean values, true means admissible and false
1001 means not admissible. As a special case, the empty expression treats
1002 all files as admissible.
1004 <h3> Mood grammar </h3>
1006 Expressions are based on a context-free grammar which distinguishes
1007 between several types for syntactic units or groupings. The grammar
1008 defines a set of keywords which have a type and a corresponding
1009 semantic value, as shown in the following table.
1011 Keyword | Type | Semantic value
1012 :--------------------|--------:|:----------------------------------
1013 `path` | string | Full path of the current audio file
1014 `artist` | string | Content of the artist meta tag
1015 `title` | string | Content of the title meta tag
1016 `album` | string | Content of the album meta tag
1017 `comment` | string | Content of the somment meta tag
1018 `num_attributes_set` | integer | Number of attributes which are set
1019 `year` | integer | Content of the year meta tag [\*]
1020 `num_played` | integer | How many times the file has been streamed
1021 `image_id` | integer | The identifier of the (cover art) image
1022 `lyrics_id` | integer | The identifier of the lyrics blob
1023 `bitrate` | integer | The average bitrate
1024 `frequency` | integer | The output sample rate
1025 `channels` | integer | The number of channels
1026 `duration` | integer | The number of milliseconds
1027 `is_set("foo")` | boolean | True if attribute "foo" is set.
1029 [\*] For most audio formats, the year tag is stored as a string. It
1030 is converted to an integer by the mood parser. If the audio file
1031 has no year tag or the content of the year tag is not a number, the
1032 semantic value is zero. A special convention applies if the year tag
1033 is a one-digit or a two-digit number. In this case 1900 is added to
1036 Expressions may be grouped using parentheses, logical and
1037 arithmetical operators or string matching operators. The following
1038 table lists the available operators.
1045 `==` | Equal (can be applied to all types)
1046 `!=` | Not equal. Likewise
1048 `<=` | Less or equal
1049 `>=` | Greater or equal
1050 `+` | Arithmetical minus
1051 `-` | Binary/unary minus
1052 `*` | Multiplication
1054 `=~` | Regular expression match
1055 `=\|` | Filename match
1057 Besides integers, strings and booleans there is an additional type
1058 which describes regular expression or wildcard patterns. Patterns
1059 are not just strings because they also include a list of flags which
1060 modify matching behaviour.
1062 Regular expression patterns are of the form `/pattern/[flags]`. That
1063 is, the pattern is delimited by slashes, and is followed by zero or
1064 more characters, each specifying a flag according to the following
1067 Flag | POSIX name | Meaning
1068 :----|--------------:|--------
1069 `i` | `REG_ICASE` | Ignore case in match
1070 `n` | `REG_NEWLINE` | Treat newline as an ordinary character
1072 Note that only extended regular expression patterns are supported. See
1073 regex(3) for details.
1075 Wildcard patterns are similar, but the pattern must be delimited by
1076 `'|'` characters rather than slashes. For wildcard patterns different
1077 flags exist, as shown below.
1079 Flag | POSIX name | Meaning
1080 :----|-----------------------:|--------
1081 `n` | `FNM_NOESCAPE` | Treat backslash as an ordinary character
1082 `p` | `FNM_PATHNAME` | Match a slash only with a slash in pattern
1083 `P` | `FNM_PERIOD` | Leading period has to be matched exactly
1084 `l` | `FNM_LEADING_DIR` [\*] | Ignore "/\*" rest after successful matching
1085 `i` | `FNM_CASEFOLD` [\*] | Ignore case in match
1086 `e` | `FNM_EXTMATCH` [\*\*] | Enable extended pattern matching
1088 [\*] Not in POSIX, but both FreeBSD and NetBSD have it.
1090 [\*\*] GNU extension, silently ignored on non GNU systems.
1092 See fnmatch(3) for details.
1094 Mood definitions may contain arbitrary whitespace and comments.
1095 A comment is a word beginning with #. This word and all remaining
1096 characters of the line are ignored.
1098 <h3> Example moods </h3>
1100 * Files with no/invalid year tag: `year == 0`
1102 * Only oldies: `year != 0 && year < 1980`
1104 * Only 80's Rock or Metal: `(year >= 1980 && year < 1990) &&
1105 (is_set("rock") || is_set("metal"))`
1107 * Files with incomplete tags: `artist == "" || title == "" || album =
1108 "" || comment == "" || year == 0`
1110 * Files with no attributes defined so far: `num_attributes_set == 0`
1112 * Only newly added files: `num_played == 0`
1114 * Only poor quality files: `bitrate < 96`
1116 * Cope with different spellings of Motörhead: `artist =~ /mot(ö|oe{0,1})rhead/i`
1118 * The same with extended wildcard patterns: `artist =| |mot+(o\|oe\|ö)rhead|ie`
1120 <h3> Mood usage </h3>
1122 To create a new mood called "my_mood", write its definition into
1123 some temporary file, say "tmpfile", and add it to the mood table
1126 para addmood my_mood < tmpfile
1128 If the mood definition is really short, you may just pipe it to the
1129 client instead of using temporary files. Like this:
1131 echo "$MOOD_DEFINITION" | para addmood my_mood
1133 There is no need to keep the temporary file since you can always use
1134 the catmood command to get it back:
1136 para catmood my_mood
1138 A mood can be activated by executing
1140 para select m/my_mood
1142 Once active, the list of admissible files is shown by the ls command
1143 if the "-a" switch is given:
1147 File renames and content changes
1148 --------------------------------
1150 Since the audio file selector knows the SHA1 of each audio file that
1151 has been added to the afs database, it recognizes if the content of
1152 a file has changed, e.g. because an ID3 tag was added or modified.
1153 Also, if a file has been renamed or moved to a different location,
1154 afs will detect that an entry with the same hash value already exists
1155 in the audio file table.
1157 In both cases it is enough to just re-add the new file. In the
1158 first case (file content changed), the audio table is updated, while
1159 metadata such as the num_played and last_played fields, as well as
1160 the attributes, remain unchanged. In the other case, when the file
1161 is moved or renamed, only the path information is updated, all other
1162 data remains as before.
1164 It is possible to change the behaviour of the add command by using the
1165 "-l" (lazy add) or the "-f" (force add) option.
1170 Use the debug loglevel (-l debug) to show debugging info. All paraslash
1171 executables have a brief online help which is displayed when -h is
1172 given. The --detailed-help option prints the full help text.
1174 If para_server crashed or was killed by SIGKILL (signal 9), it
1175 may refuse to start again because of "dirty osl tables". In this
1176 case you'll have to run the oslfsck program of libosl to fix your
1179 oslfsck -fd ~/.paraslash/afs_database-0.4
1181 However, make sure para_server isn't running before executing oslfsck.
1183 If you don't mind to recreate your database you can start
1184 from scratch by removing the entire database directory, i.e.
1186 rm -rf ~/.paraslash/afs_database-0.4
1188 Be aware that this removes all attribute definitions, all playlists
1189 and all mood definitions and requires to re-initialize the tables.
1191 Although oslfsck fixes inconsistencies in database tables it doesn't
1192 care about the table contents. To check for invalid table contents, use
1196 This prints out references to missing audio files as well as invalid
1197 playlists and mood definitions.
1199 Similarly, para_audiod refuses to start if its socket file exists, since
1200 this indicates that another instance of para_audiod is running. After
1201 a crash a stale socket file might remain and you must run
1207 =======================================
1208 Audio formats and audio format handlers
1209 =======================================
1214 The following audio formats are supported by paraslash:
1218 Mp3, MPEG-1 Audio Layer 3, is a common audio format for audio storage,
1219 designed as part of its MPEG-1 standard. An MP3 file is made up of
1220 multiple MP3 frames, which consist of a header and a data block. The
1221 size of an MP3 frame depends on the bit rate and on the number
1222 of channels. For a typical CD-audio file (sample rate of 44.1 kHz
1223 stereo), encoded with a bit rate of 128 kbit, an MP3 frame is about
1226 <h3> OGG/Vorbis </h3>
1228 OGG is a standardized audio container format, while Vorbis is an
1229 open source codec for lossy audio compression. Since Vorbis is most
1230 commonly made available via the OGG container format, it is often
1231 referred to as OGG/Vorbis. The OGG container format divides data into
1232 chunks called OGG pages. A typical OGG page is about 4KB large. The
1233 Vorbis codec creates variable-bitrate (VBR) data, where the bitrate
1234 may vary considerably.
1236 <h3> OGG/Speex </h3>
1238 Speex is an open-source speech codec that is based on CELP (Code
1239 Excited Linear Prediction) coding. It is designed for voice
1240 over IP applications, has modest complexity and a small memory
1241 footprint. Wideband and narrowband (telephone quality) speech are
1242 supported. As for Vorbis audio, Speex bit-streams are often stored
1243 in OGG files. As of 2012 this codec is considered obsolete since the
1244 Oppus codec, described below, surpasses its performance in all areas.
1248 Opus is a lossy audio compression format standardized through RFC
1249 6716 in 2012. It combines the speech-oriented SILK codec and the
1250 low-latency CELT (Constrained Energy Lapped Transform) codec. Like
1251 OGG/Vorbis and OGG/Speex, Opus data is usually encapsulated in OGG
1252 containers. All known software patents which cover Opus are licensed
1253 under royalty-free terms.
1257 Advanced Audio Coding (AAC) is a standardized, lossy compression
1258 and encoding scheme for digital audio which is the default audio
1259 format for Apple's iPhone, iPod, iTunes. Usually MPEG-4 is used as
1260 the container format and audio files encoded with AAC have the .m4a
1261 extension. A typical AAC frame is about 700 bytes large.
1265 Windows Media Audio (WMA) is an audio data compression technology
1266 developed by Microsoft. A WMA file is usually encapsulated in the
1267 Advanced Systems Format (ASF) container format, which also specifies
1268 how meta data about the file is to be encoded. The bit stream of WMA
1269 is composed of superframes, each containing one or more frames of
1270 2048 samples. For 16 bit stereo a WMA superframe is about 8K large.
1274 The Free Lossless Audio Codec (FLAC) compresses audio without quality
1275 loss. It gives better compression ratios than a general purpose
1276 compressor like zip or bzip2 because FLAC is designed specifically
1277 for audio. A FLAC-encoded file consists of frames of varying size, up
1278 to 16K. Each frame starts with a header that contains all information
1279 necessary to decode the frame.
1284 Unfortunately, each audio format has its own conventions how meta
1285 data is added as tags to the audio file.
1287 For MP3 files, ID3, version 1 and 2 are widely used. ID3 version 1
1288 is rather simple but also very limited as it supports only artist,
1289 title, album, year and comment tags. Each of these can only be at most
1290 32 characters long. ID3, version 2 is much more flexible but requires
1291 a separate library being installed for paraslash to support it.
1293 Ogg vorbis, ogg speex and flac files contain meta data as Vorbis
1294 comments, which are typically implemented as strings of the form
1295 "[TAG]=[VALUE]". Unlike ID3 version 1 tags, one may use whichever
1296 tags are appropriate for the content.
1298 AAC files usually use the MPEG-4 container format for storing meta
1299 data while WMA files wrap meta data as special objects within the
1300 ASF container format.
1302 paraslash only tracks the most common tags that are supported by
1303 all tag variants: artist, title, year, album, comment. When a file
1304 is added to the AFS database, the meta data of the file is extracted
1305 and stored in the audio file table.
1307 Chunks and chunk tables
1308 -----------------------
1310 paraslash uses the word "chunk" as common term for the building blocks
1311 of an audio file. For MP3 files, a chunk is the same as an MP3 frame,
1312 while for OGG files a chunk is an OGG page, etc. Therefore the chunk
1313 size varies considerably between audio formats, from a few hundred
1314 bytes (MP3) up to 16K (FLAC).
1316 The chunk table contains the offsets within the audio file that
1317 correspond to the chunk boundaries of the file. Like the meta data,
1318 the chunk table is computed and stored in the database whenever an
1319 audio file is added.
1321 The paraslash senders (see below) always send complete chunks. The
1322 granularity for seeking is therefore determined by the chunk size.
1324 Audio format handlers
1325 ---------------------
1327 For each audio format paraslash contains an audio format handler whose
1328 first task is to tell whether a given file is a valid audio file of
1329 this type. If so, the audio file handler extracts some technical data
1330 (duration, sampling rate, number of channels etc.), computes the
1331 chunk table and reads the meta data.
1333 The audio format handler code is linked into para_server and executed
1334 via the _add_ command. The same code is also available as a stand-alone
1335 tool, para_afh, which prints the technical data, the chunk table
1336 and the meta data of a file. Moreover, all audio format handlers are
1337 combined in the afh receiver which is part of para_recv and para_play.
1343 Paraslash uses different network connections for control and data.
1344 para_client communicates with para_server over a dedicated TCP control
1345 connection. To transport audio data, separate data connections are
1346 used. For these data connections, a variety of transports (UDP, DCCP,
1347 HTTP) can be chosen.
1349 The chapter starts with the [control
1350 service](#The.paraslash.control.service), followed by a section
1351 on the various [streaming protocols](#Streaming.protocols)
1352 in which the data connections are described. The way
1353 audio file headers are embedded into the stream is discussed
1354 [briefly](#Streams.with.headers.and.headerless.streams) before the
1355 [example section](#Networking.examples) which illustrates typical
1356 commands for real-life scenarios.
1358 Both IPv4 and IPv6 are supported.
1360 The paraslash control service
1361 -----------------------------
1363 para_server is controlled at runtime via the paraslash control
1364 connection. This connection is used for server commands (play, stop,
1365 ...) as well as for afs commands (ls, select, ...).
1367 The server listens on a TCP port and accepts connections from clients
1368 that connect the open port. Each connection causes the server to fork
1369 off a client process which inherits the connection and deals with that
1370 client only. In this classical accept/fork approach the server process
1371 is unaffected if the child dies or goes crazy for whatever reason. In
1372 fact, the child process can not change address space of server process.
1374 The section on [client-server
1375 authentication](#Client-server.authentication) above described the
1376 early connection establishment from the crypto point of view. Here
1377 it is described what happens after the connection (including crypto
1378 setup) has been established. There are four processes involved during
1379 command dispatch as sketched in the following diagram.
1381 server_host client_host
1382 ~~~~~~~~~~~ ~~~~~~~~~~~
1384 +-----------+ connect +-----------+
1385 |para_server|<------------------------------ |para_client|
1386 +-----------+ +-----------+
1389 +----------> |AFS| |
1393 | | connect (cookie) |
1396 | fork +-----+ inherited connection |
1397 +---------->|child|<--------------------------+
1400 Note that the child process is not a child of the afs process,
1401 so communication of these two processes has to happen via local
1402 sockets. In order to avoid abuse of the local socket by unrelated
1403 processes, a magic cookie is created once at server startup time just
1404 before the server process forks off the AFS process. This cookie is
1405 known to the server, AFS and the child, but not to unrelated processes.
1407 There are two different kinds of commands: First there are commands
1408 that cause the server to respond with some answer such as the list
1409 of all audio files. All but the addblob commands (addimg, addlyr,
1410 addpl, addmood) are of this kind. The addblob commands add contents
1411 to the database, so they need to transfer data the other way round,
1412 from the client to the server.
1414 There is no knowledge about the server commands built into para_client,
1415 so it does not know about addblob commands. Instead, the server sends
1416 a special "awaiting data" packet for these commands. If the client
1417 receives this packet, it sends STDIN to the server, otherwise it
1418 dumps data from the server to STDOUT.
1423 A network (audio) stream usually consists of one streaming source,
1424 the _sender_, and one or more _receivers_ which read data over the
1425 network from the streaming source.
1427 Senders are thus part of para_server while receivers are part of
1428 para_audiod. Moreover, there is the stand-alone tool para_recv which
1429 can be used to manually download a stream, either from para_server
1430 or from a web-based audio streaming service.
1432 The following three streaming protocols are supported by paraslash:
1434 - HTTP. Recommended for public streams that can be played by any
1435 player like mpg123, xmms, itunes, winamp, etc. The HTTP sender is
1436 supported on all operating systems and all platforms.
1438 - DCCP. Recommended for LAN streaming. DCCP is currently available
1441 - UDP. Recommended for multicast LAN streaming.
1443 See the Appendix on [network protocols](#Network.protocols)
1444 for brief descriptions of the various protocols relevant for network
1445 audio streaming with paraslash.
1447 It is possible to activate more than one sender simultaneously.
1448 Senders can be controlled at run time and via config file and command
1451 Note that audio connections are _not_ encrypted. Transport or Internet
1452 layer encryption should be used if encrypted data connections are
1455 Since DCCP and TCP are both connection-oriented protocols, connection
1456 establishment/teardown and access control are very similar between
1457 these two streaming protocols. UDP is the most lightweight option,
1458 since in contrast to TCP/DCCP it is connectionless. It is also the
1459 only protocol supporting IP multicast.
1461 The HTTP and the DCCP sender listen on a (TCP/DCCP) port waiting for
1462 clients to connect and establish a connection via some protocol-defined
1463 handshake mechanism. Both senders maintain two linked lists each:
1464 The list of all clients which are currently connected, and the list
1465 of access control entries which determines who is allowed to connect.
1466 IP-based access control may be configured through config file and
1467 command line options and via the "allow" and "deny" sender subcommands.
1469 Upon receiving a GET request from the client, the HTTP sender sends
1470 back a status line and a message. The body of this message is the
1471 audio stream. This is common practice and is supported by many popular
1472 clients which can thus be used to play a stream offered by para_server.
1473 For DCCP things are a bit simpler: No messages are exchanged between
1474 the receiver and sender. The client simply connects and the sender
1477 DCCP is an experimental protocol which offers a number of new features
1478 not available for TCP. Both ends can negotiate these features using
1479 a built-in negotiation mechanism. In contrast to TCP/HTTP, DCCP is
1480 datagram-based (no retransmissions) and thus should not be used over
1481 lossy media (e.g. WiFi networks). One useful feature offered by DCCP
1482 is access to a variety of different congestion-control mechanisms
1483 called CCIDs. Two different CCIDs are available per default on Linux:
1486 - _CCID 2_. A Congestion Control mechanism similar to that of TCP. The
1487 sender maintains a congestion window and halves this window in response
1491 - _CCID-3_. Designed to be fair when competing for bandwidth.
1492 It has lower variation of throughput over time compared with TCP,
1493 which makes it suitable for streaming media.
1495 Unlike the HTTP and DCCP senders, the UDP sender maintains only a
1496 single list, the _target list_. This list describes the set of clients
1497 to which the stream is sent. There is no list for access control and
1498 no "allow" and "deny" commands for the UDP sender. Instead, the "add"
1499 and "delete" commands can be used to modify the target list.
1501 Since both UDP and DCCP offer an unreliable datagram-based transport,
1502 additional measures are necessary to guard against disruptions over
1503 networks that are lossy or which may be subject to interference (as
1504 is for instance the case with WiFi). Paraslash uses FEC (Forward
1505 Error Correction) to guard against packet losses and reordering. The
1506 stream is FEC-encoded before it is sent through the UDP socket and
1507 must be decoded accordingly on the receiver side.
1509 The packet size and the amount of redundancy introduced by FEC can
1510 be configured via the FEC parameters which are dictated by server
1511 and may also be configured through the "sender" command. The FEC
1512 parameters are encoded in the header of each network packet, so no
1513 configuration is necessary on the receiver side. See the section on
1514 [FEC](#Forward.error.correction) below.
1516 Streams with headers and headerless streams
1517 -------------------------------------------
1519 For OGG/Vorbis, OGG/Speex and wma streams, some of the information
1520 needed to decode the stream is only contained in the audio file
1521 header of the container format but not in each data chunk. Clients
1522 must be able to obtain this information in case streaming starts in
1523 the middle of the file or if para_audiod is started while para_server
1524 is already sending a stream.
1526 This is accomplished in different ways, depending on the streaming
1527 protocol. For connection-oriented streams (HTTP, DCCP) the audio file
1528 header is sent prior to audio file data. This technique however does
1529 not work for the connectionless UDP transport. Hence the audio file
1530 header is periodically being embedded into the UDP audio data stream.
1531 By default, the header is resent after five seconds. The receiver has
1532 to wait until the next header arrives before it can start decoding
1538 The "si" (server info) command lists some information about the
1539 currently running server process.
1541 -> Show PIDs, number of connected clients, uptime, and more:
1545 By default para_server activates both the HTTP and th DCCP sender on
1546 startup. This can be changed via command line options or para_server's
1549 -> List config file options for senders:
1553 -> Receive a DCCP stream using CCID2 and write the output into a file:
1555 host=foo.org; ccid=2; filename=bar
1556 para_recv --receiver "dccp --host $host --ccid $ccid" > $filename
1558 Note the quotes around the arguments for the dccp receiver. Each
1559 receiver has its own set of command line options and its own command
1560 line parser, so arguments for the dccp receiver must be protected
1561 from being interpreted by para_recv.
1563 -> Receive FEC-encoded multicast stream and write the output into a file:
1566 para_recv -r udp > $filename
1568 -> Receive this (FEC-encoded) unicast stream:
1571 para_recv -r 'udp -i 0.0.0.0' > $filename
1573 -> Create a minimal config for para_audiod for HTTP streams:
1575 c=$HOME/.paraslash/audiod.conf.min; s=server.foo.com
1576 echo receiver \".:http -i $s\" > $c
1577 para_audiod --config $c
1583 A paraslash filter is a module which transforms an input stream into
1584 an output stream. Filters are included in the para_audiod executable
1585 and in the stand-alone tool para_filter which usually contains the
1588 While para_filter reads its input stream from STDIN and writes
1589 the output to STDOUT, the filter modules of para_audiod are always
1590 connected to a receiver which produces the input stream and a writer
1591 which absorbs the output stream.
1593 Some filters depend on a specific library and are not compiled in
1594 if this library was not found at compile time. To see the list of
1595 supported filters, run para_filter and para_audiod with the --help
1596 option. The output looks similar to the following:
1599 compress wav amp fecdec wmadec prebuffer oggdec aacdec mp3dec
1601 Out of these filter modules, a chain of filters can be constructed,
1602 much in the way Unix pipes can be chained, and analogous to the use
1603 of modules in gstreamer: The output of the first filter becomes the
1604 input of the second filter. There is no limitation on the number of
1605 filters and the same filter may occur more than once.
1607 Like receivers, each filter has its own command line options which
1608 must be quoted to protect them from the command line options of
1609 the driving application (para_audiod or para_filter). Example:
1611 para_filter -f 'mp3dec --ignore-crc' -f 'compress --damp 1'
1613 For para_audiod, each audio format has its own set of filters. The
1614 name of the audio format for which the filter should be applied can
1615 be used as the prefix for the filter option. Example:
1617 para_audiod -f 'mp3:prebuffer --duration 300'
1619 The "mp3" prefix above is actually interpreted as a POSIX extended
1620 regular expression. Therefore
1622 para_audiod -f '.:prebuffer --duration 300'
1624 activates the prebuffer filter for all supported audio formats (because
1625 "." matches all audio formats) while
1627 para_audiod -f 'wma|ogg:prebuffer --duration 300'
1629 activates it only for wma and ogg streams.
1634 For each supported audio format there is a corresponding filter
1635 which decodes audio data in this format to 16 bit PCM data which
1636 can be directly sent to the sound device or any other software that
1637 operates on undecoded PCM data (visualizers, equalizers etc.). Such
1638 filters are called _decoders_ in general, and xxxdec is the name of
1639 the paraslash decoder for the audio format xxx. For example, the mp3
1640 decoder is called mp3dec.
1642 Note that the output of the decoder is about 10 times larger than
1643 its input. This means that filters that operate on the decoded audio
1644 stream have to deal with much more data than filters that transform
1645 the audio stream before it is fed to the decoder.
1647 Paraslash relies on external libraries for most decoders, so these
1648 libraries must be installed for the decoder to be included in the
1649 executables. For example, the mp3dec filter depends on the mad library.
1651 Forward error correction
1652 ------------------------
1654 As already mentioned [earlier](#Streaming.protocols), paraslash
1655 uses forward error correction (FEC) for the unreliable UDP and
1656 DCCP transports. FEC is a technique which was invented already in
1657 1960 by Reed and Solomon and which is widely used for the parity
1658 calculations of storage devices (RAID arrays). It is based on the
1659 algebraic concept of finite fields, today called Galois fields, in
1660 honour of the mathematician Galois (1811-1832). The FEC implementation
1661 of paraslash is based on code by Luigi Rizzo.
1663 Although the details require a sound knowledge of the underlying
1664 mathematics, the basic idea is not hard to understand: For positive
1665 integers k and n with k < n it is possible to compute for any k given
1666 data bytes d_1, ..., d_k the corresponding r := n -k parity bytes p_1,
1667 ..., p_r such that all data bytes can be reconstructed from *any*
1670 {d_1, ..., d_k, p_1, ..., p_r}.
1672 FEC-encoding for unreliable network transports boils down to slicing
1673 the audio stream into groups of k suitably sized pieces called _slices_
1674 and computing the r corresponding parity slices. This step is performed
1675 in para_server which then sends both the data and the parity slices
1676 over the unreliable network connection. If the client was able
1677 to receive at least k of the n = k + r slices, it can reconstruct
1678 (FEC-decode) the original audio stream.
1680 From these observations it is clear that there are three different
1681 FEC parameters: The slice size, the number of data slices k, and the
1682 total number of slices n. It is crucial to choose the slice size
1683 such that no fragmentation of network packets takes place because
1684 FEC only guards against losses and reordering but fails if slices are
1687 FEC decoding in paralash is performed through the fecdec filter which
1688 usually is the first filter (there can be other filters before fecdec
1689 if these do not alter the audio stream).
1691 Volume adjustment (amp and compress)
1692 ------------------------------------
1694 The amp and the compress filter both adjust the volume of the audio
1695 stream. These filters operate on uncompressed audio samples. Hence
1696 they are usually placed directly after the decoding filter. Each
1697 sample is multiplied with a scaling factor (>= 1) which makes amp
1698 and compress quite expensive in terms of computing power.
1702 The amp filter amplifies the audio stream by a fixed scaling factor
1703 that must be known in advance. For para_audiod this factor is derived
1704 from the amplification field of the audio file's entry in the audio
1705 file table while para_filter uses the value given at the command line.
1707 The optimal scaling factor F for an audio file is the largest real
1708 number F >= 1 such that after multiplication with F all samples still
1709 fit into the sample interval [-32768, 32767]. One can use para_filter
1710 in combination with the sox utility to compute F:
1712 para_filter -f mp3dec -f wav < file.mp3 | sox -t wav - -e stat -v
1714 The amplification value V which is stored in the audio file table,
1715 however, is an integer between 0 and 255 which is connected to F
1720 To store V in the audio file table, the command
1722 para_client -- touch -a=V file.mp3
1724 is used. The reader is encouraged to write a script that performs
1725 these computations :)
1729 Unlike the amplification filter, the compress filter adjusts the volume
1730 of the audio stream dynamically without prior knowledge about the peak
1731 value. It maintains the maximal volume of the last n samples of the
1732 audio stream and computes a suitable amplification factor based on that
1733 value and the various configuration options. It tries to chose this
1734 factor such that the adjusted volume meets the desired target level.
1736 Note that it makes sense to combine amp and compress.
1738 Misc filters (wav and prebuffer)
1739 --------------------------------
1741 These filters are rather simple and do not modify the audio stream at
1742 all. The wav filter is only useful with para_filter and in connection
1743 with a decoder. It asks the decoder for the number of channels and the
1744 sample rate of the stream and adds a Microsoft wave header containing
1745 this information at the beginning. This allows writing wav files
1746 rather than raw PCM files (which do not contain any information about
1747 the number of channels and the sample rate).
1749 The prebuffer filter simply delays the output until the given time has
1750 passed (starting from the time the first byte was available in its
1751 input queue) or until the given amount of data has accumulated. It
1752 is mainly useful for para_audiod if the standard parameters result
1753 in buffer underruns.
1755 Both filters require almost no additional computing time, even when
1756 operating on uncompressed audio streams, since data buffers are simply
1757 "pushed down" rather than copied.
1763 Once an audio stream has been received and decoded to PCM format,
1764 it can be sent to a sound device for playback. This part is performed
1765 by paraslash _writers_ which are described in this chapter.
1770 A paraslash writer acts as a data sink that consumes but does not
1771 produce audio data. Paraslash writers operate on the client side and
1772 are contained in para_audiod and in the stand-alone tool para_write.
1774 The para_write program reads uncompressed audio data from STDIN. If
1775 this data starts with a wav header, sample rate, sample format and
1776 channel count are read from the header. Otherwise CD audio (44.1KHz
1777 16 bit little endian, stereo) is assumed but this can be overridden
1778 by command line options. para_audiod, on the other hand, obtains
1779 the sample rate and the number of channels from the decoder.
1781 Like receivers and filters, each writer has an individual set of
1782 command line options, and for para_audiod writers can be configured
1783 per audio format separately. It is possible to activate more than
1784 one writer for the same stream simultaneously.
1789 Unfortunately, the various flavours of Unix on which paraslash
1790 runs on have different APIs for opening a sound device and starting
1791 playback. Hence for each such API there is a paraslash writer that
1792 can play the audio stream via this API.
1794 - *ALSA*. The _Advanced Linux Sound Architecture_ is only available on
1795 Linux systems. Although there are several mid-layer APIs in use by
1796 the various Linux distributions (ESD, Jack, PulseAudio), paraslash
1797 currently supports only the low-level ALSA API which is not supposed
1798 to be change. ALSA is very feature-rich, in particular it supports
1799 software mixing via its DMIX plugin. ALSA is the default writer on
1802 - *OSS*. The _Open Sound System_ is the only API on \*BSD Unixes and
1803 is also available on Linux systems, usually provided by ALSA as an
1804 emulation for backwards compatibility. This API is rather simple but
1805 also limited. For example only one application can open the device
1806 at any time. The OSS writer is activated by default on BSD Systems.
1808 - *FILE*. The file writer allows capturing the audio stream and
1809 writing the PCM data to a file on the file system rather than playing
1810 it through a sound device. It is supported on all platforms and is
1813 - *AO*. _Libao_ is a cross-platform audio library which supports a wide
1814 variety of platforms including PulseAudio (gnome), ESD (Enlightened
1815 Sound Daemon), AIX, Solaris and IRIX. The ao writer plays audio
1816 through an output plugin of libao.
1821 -> Use the OSS writer to play a wav file:
1823 para_write --writer oss < file.wav
1825 -> Enable ALSA software mixing for mp3 streams:
1827 para_audiod --writer 'mp3:alsa -d plug:swmix'
1834 para_gui executes an arbitrary command which is supposed to print
1835 status information to STDOUT. It then displays this information in
1836 a curses window. By default the command
1838 para_audioc -- stat -p
1840 is executed, but this can be customized via the --stat-cmd option. In
1841 particular it possible to use
1843 para_client -- stat -p
1845 to make para_gui work on systems on which para_audiod is not running.
1850 It is possible to bind keys to arbitrary commands via custom
1851 key-bindings. Besides the internal keys which can not be changed (help,
1852 quit, loglevel, version...), the following flavours of key-bindings
1855 - external: Shutdown curses before launching the given command.
1856 Useful for starting other ncurses programs from within para_gui,
1857 e.g. aumix or dialog scripts. Or, use the mbox output format to write
1858 a mailbox containing one mail for each (admissible) file the audio
1859 file selector knows about. Then start mutt from within para_gui to
1860 browse your collection!
1862 - display: Launch the command and display its stdout in para_gui's
1865 - para: Like display, but start "para_client <specified command>"
1866 instead of "<specified command>".
1868 The general form of a key binding is
1872 which maps key k to command c using mode m. Mode may be x, d or p
1873 for external, display and paraslash commands, respectively.
1878 Currently there are only two themes for para_gui. It is easy, however,
1879 to add more themes. To create a new theme one has to define the
1880 position, color and geometry for for each status item that should be
1881 shown by this theme. See gui_theme.c for examples.
1883 The "." and "," keys are used to switch between themes.
1888 -> Show server info:
1892 -> Jump to the middle of the current audio file by pressing F5:
1894 key_map "<F5>:p:jmp 50"
1896 -> vi-like bindings for jumping around:
1899 key_map "h:p:ff 10-"
1901 key_map "b:p:ff 60-"
1903 -> Print the current date and time:
1907 -> Call other curses programs:
1910 key_map "!:x:/bin/bash"
1911 key_map "^E:x:/bin/sh -c 'vi ~/.paraslash/gui.conf'"
1920 Paraslash is an open source project and contributions are
1921 welcome. Here's a list of things you can do to help the project:
1923 - Report problems with building, installing or running the software.
1924 In particular, test the experimental git branches ("next" and "pu").
1925 This helps to identify and fix problems before the code gets merged
1926 and thus keeps the master branch as stable as possible.
1927 - Proofread the documentation (manual, web pages, man pages, source
1928 code documentation) and point out unclear or poorly written parts. If
1929 you are a native English speaker you will easily find a lot of text
1930 that could be improved.
1931 - Run analysis tools (coverity, afl, sparse, etc.) and report issues
1932 found by those tools.
1933 - Suggest new features you would like to see implemented.
1934 - Compile and test on your favorite architecture or operating
1935 system. The code is tested only on a limited set of systems, so you
1936 will probably encounter problems when building on different systems.
1937 - Post about paraslash on your blog or on social networks.
1938 - Build and maintain Debian/RPM packages for your favorite distribution.
1940 Note that there is no mailing list, no bug tracker and no discussion
1941 forum for paraslash. If you'd like to contribute, or have questions
1942 about contributing, send email to Andre Noll <maan@tuebingen.mpg.de>.
1943 New releases are announced by email. If you would like to receive
1944 these announcements, contact the author through the above address.
1949 In order to compile the sources from the git repository (rather than
1950 from tar balls) and for contributing non-trivial changes to the
1951 paraslash project, some additional tools should be installed on a
1954 - [git](http://git.or.cz/). As described in more detail
1955 [below](#Git.branches), the git source code management tool is used for
1956 paraslash development. It is necessary for cloning the git repository
1957 and for getting updates.
1959 - [autoconf](ftp://ftp.gnu.org/pub/gnu/autoconf/) GNU autoconf creates
1960 the configure file which is shipped in the tarballs but has to be
1961 generated when compiling from git.
1963 - [discount](http://www.pell.portland.or.us/~orc/Code/discount/). The
1964 HTML version of this manual and some of the paraslash web pages are
1965 written in the Markdown markup language and are translated into html
1966 with the converter of the *Discount* package.
1968 - [doxygen](http://www.stack.nl/~dimitri/doxygen/). The documentation
1969 of paraslash's C sources uses the doxygen documentation system. The
1970 conventions for documenting the source code is described in the
1971 [Doxygen section](#Doxygen).
1973 - [global](ftp://ftp.gnu.org/pub/gnu/global). This is used to generate
1974 browsable HTML from the C sources. It is needed by doxygen.
1979 Paraslash has been developed using the git source code management
1980 tool since 2006. Development is organized roughly in the same spirit
1981 as the git development itself, as described below.
1983 The following text passage is based on "A note from the maintainer",
1984 written by Junio C Hamano, the maintainer of git.
1986 There are four branches in the paraslash repository that track the
1987 source tree: "master", "maint", "next", and "pu".
1989 The "master" branch is meant to contain what is well tested and
1990 ready to be used in a production setting. There could occasionally be
1991 minor breakages or brown paper bag bugs but they are not expected to
1992 be anything major, and more importantly quickly and easily fixable.
1993 Every now and then, a "feature release" is cut from the tip of this
1994 branch, named with three dotted decimal digits, like 0.4.2.
1996 Whenever changes are about to be included that will eventually lead to
1997 a new major release (e.g. 0.5.0), a "maint" branch is forked off from
1998 "master" at that point. Obvious, safe and urgent fixes after the major
1999 release are applied to this branch and maintenance releases are cut
2000 from it. New features never go to this branch. This branch is also
2001 merged into "master" to propagate the fixes forward.
2003 A trivial and safe enhancement goes directly on top of "master".
2004 New development does not usually happen on "master", however.
2005 Instead, a separate topic branch is forked from the tip of "master",
2006 and it first is tested in isolation; Usually there are a handful such
2007 topic branches that are running ahead of "master". The tip of these
2008 branches is not published in the public repository to keep the number
2009 of branches that downstream developers need to worry about low.
2011 The quality of topic branches varies widely. Some of them start out as
2012 "good idea but obviously is broken in some areas" and then with some
2013 more work become "more or less done and can now be tested by wider
2014 audience". Luckily, most of them start out in the latter, better shape.
2016 The "next" branch is to merge and test topic branches in the latter
2017 category. In general, this branch always contains the tip of "master".
2018 It might not be quite rock-solid production ready, but is expected to
2019 work more or less without major breakage. The maintainer usually uses
2020 the "next" version of paraslash for his own pleasure, so it cannot
2021 be _that_ broken. The "next" branch is where new and exciting things
2024 The two branches "master" and "maint" are never rewound, and "next"
2025 usually will not be either (this automatically means the topics that
2026 have been merged into "next" are usually not rebased, and you can find
2027 the tip of topic branches you are interested in from the output of
2028 "git log next"). You should be able to safely build on top of them.
2030 However, at times "next" will be rebuilt from the tip of "master" to
2031 get rid of merge commits that will never be in "master". The commit
2032 that replaces "next" will usually have the identical tree, but it
2033 will have different ancestry from the tip of "master".
2035 The "pu" (proposed updates) branch bundles the remainder of the
2036 topic branches. The "pu" branch, and topic branches that are only in
2037 "pu", are subject to rebasing in general. By the above definition
2038 of how "next" works, you can tell that this branch will contain quite
2039 experimental and obviously broken stuff.
2041 When a topic that was in "pu" proves to be in testable shape, it
2042 graduates to "next". This is done with
2045 git merge that-topic-branch
2047 Sometimes, an idea that looked promising turns out to be not so good
2048 and the topic can be dropped from "pu" in such a case.
2050 A topic that is in "next" is expected to be polished to perfection
2051 before it is merged to "master". Similar to the above, this is
2055 git merge that-topic-branch
2056 git branch -d that-topic-branch
2058 Note that being in "next" is not a guarantee to appear in the next
2059 release (being in "master" is such a guarantee, unless it is later
2060 found seriously broken and reverted), nor even in any future release.
2065 The preferred coding style for paraslash coincides more or less
2066 with the style of the Linux kernel. So rather than repeating what is
2067 written [there](https://www.kernel.org/doc/Documentation/process/coding-style.rst),
2068 here are the most important points.
2070 - Burn the GNU coding standards.
2071 - Never use spaces for indentation.
2072 - Tabs are 8 characters, and thus indentations are also 8 characters.
2073 - Don't put multiple assignments on a single line.
2074 - Avoid tricky expressions.
2075 - Don't leave whitespace at the end of lines.
2076 - The limit on the length of lines is 80 columns.
2077 - Use K&R style for placing braces and spaces:
2083 - Use a space after (most) keywords.
2084 - Do not add spaces around (inside) parenthesized expressions.
2085 - Use one space around (on each side of) most binary and ternary operators.
2086 - Do not use cute names like ThisVariableIsATemporaryCounter, call it tmp.
2087 - Mixed-case names are frowned upon.
2088 - Descriptive names for global variables are a must.
2090 - Functions should be short and sweet, and do just one thing.
2091 - The number of local variables shouldn't exceed 10.
2092 - Gotos are fine if they improve readability and reduce nesting.
2093 - Don't use C99-style "// ..." comments.
2094 - Names of macros defining constants and labels in enums are capitalized.
2095 - Enums are preferred when defining several related constants.
2096 - Always use the paraslash wrappers for allocating memory.
2097 - If the name of a function is an action or an imperative.
2098 command, the function should return an error-code integer
2099 (<0 means error, >=0 means success). If the name is a
2100 predicate, the function should return a "succeeded" boolean.
2105 Doxygen is a documentation system for various programming
2106 languages. The API reference on the paraslash web page is generated
2109 It is more illustrative to look at the source code for examples than
2110 to describe the conventions in this manual, so we only describe which
2111 parts of the code need doxygen comments, but leave out details on
2112 documentation conventions.
2114 As a rule, only the public part of the C source is documented with
2115 Doxygen. This includes structures, defines and enumerations in header
2116 files as well as public (non-static) C functions. These should be
2117 documented completely. For example, each parameter and the return
2118 value of a public function should get a descriptive doxygen comment.
2120 No doxygen comments are necessary for static functions and for
2121 structures and enumerations in C files (which are used only within
2122 this file). This does not mean, however, that those entities need
2123 no documentation at all. Instead, common sense should be applied to
2124 document what is not obvious from reading the code.
2135 The _Internet Protocol_ is the primary networking protocol used for
2136 the Internet. All protocols described below use IP as the underlying
2137 layer. Both the prevalent IPv4 and the next-generation IPv6 variant
2138 are being deployed actively worldwide.
2140 <h3> Connection-oriented and connectionless protocols </h3>
2142 Connectionless protocols differ from connection-oriented ones in
2143 that state associated with the sending/receiving endpoints is treated
2144 implicitly. Connectionless protocols maintain no internal knowledge
2145 about the state of the connection. Hence they are not capable of
2146 reacting to state changes, such as sudden loss or congestion on the
2147 connection medium. Connection-oriented protocols, in contrast, make
2148 this knowledge explicit. The connection is established only after
2149 a bidirectional handshake which requires both endpoints to agree
2150 on the state of the connection, and may also involve negotiating
2151 specific parameters for the particular connection. Maintaining an
2152 up-to-date internal state of the connection also in general means
2153 that the sending endpoints perform congestion control, adapting to
2154 qualitative changes of the connection medium.
2156 <h3> Reliability </h3>
2158 In IP networking, packets can be lost, duplicated, or delivered
2159 out of order, and different network protocols handle these
2160 problems in different ways. We call a transport-layer protocol
2161 _reliable_, if it turns the unreliable IP delivery into an ordered,
2162 duplicate- and loss-free delivery of packets. Sequence numbers
2163 are used to discard duplicates and re-arrange packets delivered
2164 out-of-order. Retransmission is used to guarantee loss-free
2165 delivery. Unreliable protocols, in contrast, do not guarantee ordering
2168 <h3> Classification </h3>
2170 With these definitions the protocols which are used by paraslash for
2171 steaming audio data may be classified as follows.
2173 - HTTP/TCP: connection-oriented, reliable,
2174 - UDP: connectionless, unreliable,
2175 - DCCP: connection-oriented, unreliable.
2177 Below we give a short descriptions of these protocols.
2181 The _Transmission Control Protocol_ provides reliable, ordered delivery
2182 of a stream and a classic window-based congestion control. In contrast
2183 to UDP and DCCP (see below), TCP does not have record-oriented or
2184 datagram-based syntax, i.e. it provides a stream which is unaware
2185 and independent of any record (packet) boundaries. TCP is used
2186 extensively by many application layers. Besides HTTP (the Hypertext
2187 Transfer Protocol), also FTP (the File Transfer protocol), SMTP (Simple
2188 Mail Transfer Protocol), SSH (Secure Shell) all sit on top of TCP.
2192 The _User Datagram Protocol_ is the simplest transport-layer protocol,
2193 built as a thin layer directly on top of IP. For this reason, it offers
2194 the same best-effort service as IP itself, i.e. there is no detection
2195 of duplicate or reordered packets. Being a connectionless protocol,
2196 only minimal internal state about the connection is maintained, which
2197 means that there is no protection against packet loss or network
2198 congestion. Error checking and correction (if at all) are performed
2203 The _Datagram Congestion Control Protocol_ combines the
2204 connection-oriented state maintenance known from TCP with the
2205 unreliable, datagram-based transport of UDP. This means that it
2206 is capable of reacting to changes in the connection by performing
2207 congestion control, offering multiple alternative approaches. But it
2208 is bound to datagram boundaries (the maximum packet size supported
2209 by a medium), and like UDP it lacks retransmission to protect
2210 against loss. Due to the use of sequence numbers, it is however
2211 able to react to loss (interpreted as a congestion indication) and
2212 to ignore out-of-order and duplicate packets. Unlike TCP it allows
2213 to negotiate specific, binding features for a connection, such as
2214 the choice of congestion control: classic, window-based congestion
2215 control known from TCP is available as CCID-2, rate-based, "smooth"
2216 congestion control is offered as CCID-3.
2220 The _Hypertext Transfer Protocol_ is an application layer protocol
2221 on top of TCP. It is spoken by web servers and is most often used
2222 for web services. However, as can be seen by the many Internet radio
2223 stations and YouTube/Flash videos, http is by far not limited to the
2224 delivery of web pages only. Being a simple request/response based
2225 protocol, the semantics of the protocol also allow the delivery of
2226 multimedia content, such as audio over http.
2228 <h3> Multicast </h3>
2230 IP multicast is not really a protocol but a technique for one-to-many
2231 communication over an IP network. The challenge is to deliver
2232 information to a group of destinations simultaneously using the
2233 most efficient strategy to send the messages over each link of the
2234 network only once. This has benefits for streaming multimedia: the
2235 standard one-to-one unicast offered by TCP/DCCP means that n clients
2236 listening to the same stream also consume n-times the resources,
2237 whereas multicast requires to send the stream just once, irrespective
2238 of the number of receivers. Since it would be costly to maintain state
2239 for each listening receiver, multicast often implies connectionless
2240 transport, which is the reason that it is currently only available
2243 Abstract socket namespace
2244 -------------------------
2245 UNIX domain sockets are a traditional way to communicate between
2246 processes on the same machine. They are always reliable (see above)
2247 and don't reorder datagrams. Unlike TCP and UDP, UNIX domain sockets
2248 support passing open file descriptors or process credentials to
2251 The usual way to set up a UNIX domain socket (as obtained from
2252 socket(2)) for listening is to first bind the socket to a file system
2253 pathname and then call listen(2), then accept(2). Such sockets are
2254 called _pathname sockets_ because bind(2) creates a special socket
2255 file at the specified path. Pathname sockets allow unrelated processes
2256 to communicate with the listening process by binding to the same path
2257 and calling connect(2).
2259 There are two problems with pathname sockets:
2261 * The listing process must be able to (safely) create the
2262 socket special in a directory which is also accessible to
2263 the connecting process.
2265 * After an unclean shutdown of the listening process, a stale
2266 socket special may reside on the file system.
2268 The abstract socket namespace is a non-portable Linux feature which
2269 avoids these problems. Abstract sockets are still bound to a name,
2270 but the name has no connection with file system pathnames.
2275 Paraslash is licensed under the GPL, version 2. Most of the code
2276 base has been written from scratch, and those parts are GPL V2
2277 throughout. Notable exceptions are FEC and the WMA decoder. See the
2278 corresponding source files for licencing details for these parts. Some
2279 code sniplets of several other third party software packages have
2280 been incorporated into the paraslash sources, for example log message
2281 coloring was taken from the git sources. These third party software
2282 packages are all published under the GPL or some other license
2283 compatible to the GPL.
2288 Many thanks to Gerrit Renker who read an early draft of this manual
2289 and contributed significant improvements.
2297 - [Polynomial Codes over Certain Finite
2298 Fields](http://kom.aau.dk/~heb/kurser/NOTER/KOFA01.PDF) by Reed, Irving
2299 S.; Solomon, Gustave (1960), Journal of the Society for Industrial
2300 and Applied Mathematics (SIAM) 8 (2): 300-304, doi:10.1137/0108018)
2305 - [RFC 768](http://www.ietf.org/rfc/rfc768.txt) (1980): User Datagram
2308 - [RFC 791](http://www.ietf.org/rfc/rfc791.txt) (1981): Internet
2311 - [RFC 2437](http://www.ietf.org/rfc/rfc2437.txt) (1998): RSA
2312 Cryptography Specifications
2314 - [RFC 4340](http://www.ietf.org/rfc/rfc4340.txt) (2006): Datagram
2315 Congestion Control Protocol (DCCP)
2317 - [RFC 4341](http://www.ietf.org/rfc/rfc4341.txt) (2006): Congestion
2318 Control ID 2: TCP-like Congestion Control
2320 - [RFC 4342](http://www.ietf.org/rfc/rfc4342.txt) (2006): Congestion
2321 Control ID 3: TCP-Friendly Rate Control (TFRC)
2323 - [RFC 6716](http://www.ietf.org/rfc/rfc6716.txt) (2012): Definition
2324 of the Opus Audio Codec
2326 Application web pages
2327 ---------------------
2329 - [paraslash](http://people.tuebingen.mpg.de/maan/paraslash/)
2330 - [xmms](https://xmms2.org/wiki/Main_Page)
2331 - [mpg123](http://www.mpg123.de/)
2332 - [gstreamer](https://gstreamer.freedesktop.org/)
2333 - [icecast](http://www.icecast.org/)
2334 - [Audio Compress](https://beesbuzz.biz/code/audiocompress.php)
2336 External documentation
2337 ----------------------
2339 - [The mathematics of
2340 Raid6](https://www.kernel.org/pub/linux/kernel/people/hpa/raid6.pdf)
2343 - [Effective Erasure Codes for reliable Computer Communication
2344 Protocols](http://info.iet.unipi.it/~luigi/fec_ccr.ps.gz) by Luigi
2350 implementation](http://info.iet.unipi.it/~luigi/vdm.tar.gz) by