NEWS update.
[paraslash.git] / Doxyfile
1 # Doxyfile 1.5.3
2
3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project
5 #
6 # All text after a hash (#) is considered a comment and will be ignored
7 # The format is:
8 # TAG = value [value, ...]
9 # For lists items can also be appended using:
10 # TAG += value [value, ...]
11 # Values that contain spaces should be placed between quotes (" ")
12
13 #---------------------------------------------------------------------------
14 # Project related configuration options
15 #---------------------------------------------------------------------------
16
17 # This tag specifies the encoding used for all characters in the config file that
18 # follow. The default is UTF-8 which is also the encoding used for all text before
19 # the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into
20 # libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of
21 # possible encodings.
22
23 DOXYFILE_ENCODING = UTF-8
24
25 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26 # by quotes) that should identify the project.
27
28 PROJECT_NAME = paraslash
29
30 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
31 # This could be handy for archiving the generated documentation or
32 # if some version control system is used.
33
34 PROJECT_NUMBER =
35
36 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37 # base path where the generated documentation will be put.
38 # If a relative path is entered, it will be relative to the location
39 # where doxygen was started. If left blank the current directory will be used.
40
41 OUTPUT_DIRECTORY = web_sync/doxygen
42
43 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44 # 4096 sub-directories (in 2 levels) under the output directory of each output
45 # format and will distribute the generated files over these directories.
46 # Enabling this option can be useful when feeding doxygen a huge amount of
47 # source files, where putting all generated files in the same directory would
48 # otherwise cause performance problems for the file system.
49
50 CREATE_SUBDIRS = NO
51
52 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
53 # documentation generated by doxygen is written. Doxygen will use this
54 # information to generate all constant output in the proper language.
55 # The default language is English, other supported languages are:
56 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57 # Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian,
58 # Italian, Japanese, Japanese-en (Japanese with English messages), Korean,
59 # Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian,
60 # Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
61
62 OUTPUT_LANGUAGE = English
63
64 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
65 # include brief member descriptions after the members that are listed in
66 # the file and class documentation (similar to JavaDoc).
67 # Set to NO to disable this.
68
69 BRIEF_MEMBER_DESC = YES
70
71 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
72 # the brief description of a member or function before the detailed description.
73 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
74 # brief descriptions will be completely suppressed.
75
76 REPEAT_BRIEF = YES
77
78 # This tag implements a quasi-intelligent brief description abbreviator
79 # that is used to form the text in various listings. Each string
80 # in this list, if found as the leading text of the brief description, will be
81 # stripped from the text and the result after processing the whole list, is
82 # used as the annotated text. Otherwise, the brief description is used as-is.
83 # If left blank, the following values are used ("$name" is automatically
84 # replaced with the name of the entity): "The $name class" "The $name widget"
85 # "The $name file" "is" "provides" "specifies" "contains"
86 # "represents" "a" "an" "the"
87
88 ABBREVIATE_BRIEF =
89
90 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
91 # Doxygen will generate a detailed section even if there is only a brief
92 # description.
93
94 ALWAYS_DETAILED_SEC = NO
95
96 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
97 # inherited members of a class in the documentation of that class as if those
98 # members were ordinary class members. Constructors, destructors and assignment
99 # operators of the base classes will not be shown.
100
101 INLINE_INHERITED_MEMB = NO
102
103 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
104 # path before files name in the file list and in the header files. If set
105 # to NO the shortest path that makes the file name unique will be used.
106
107 FULL_PATH_NAMES = YES
108
109 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
110 # can be used to strip a user-defined part of the path. Stripping is
111 # only done if one of the specified strings matches the left-hand part of
112 # the path. The tag can be used to show relative paths in the file list.
113 # If left blank the directory from which doxygen is run is used as the
114 # path to strip.
115
116 STRIP_FROM_PATH =
117
118 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
119 # the path mentioned in the documentation of a class, which tells
120 # the reader which header file to include in order to use a class.
121 # If left blank only the name of the header file containing the class
122 # definition is used. Otherwise one should specify the include paths that
123 # are normally passed to the compiler using the -I flag.
124
125 STRIP_FROM_INC_PATH =
126
127 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
128 # (but less readable) file names. This can be useful is your file systems
129 # doesn't support long names like on DOS, Mac, or CD-ROM.
130
131 SHORT_NAMES = NO
132
133 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
134 # will interpret the first line (until the first dot) of a JavaDoc-style
135 # comment as the brief description. If set to NO, the JavaDoc
136 # comments will behave just like regular Qt-style comments
137 # (thus requiring an explicit @brief command for a brief description.)
138
139 JAVADOC_AUTOBRIEF = YES
140
141 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
142 # interpret the first line (until the first dot) of a Qt-style
143 # comment as the brief description. If set to NO, the comments
144 # will behave just like regular Qt-style comments (thus requiring
145 # an explicit \brief command for a brief description.)
146
147 QT_AUTOBRIEF = NO
148
149 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
150 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
151 # comments) as a brief description. This used to be the default behaviour.
152 # The new default is to treat a multi-line C++ comment block as a detailed
153 # description. Set this tag to YES if you prefer the old behaviour instead.
154
155 MULTILINE_CPP_IS_BRIEF = NO
156
157 # If the DETAILS_AT_TOP tag is set to YES then Doxygen
158 # will output the detailed description near the top, like JavaDoc.
159 # If set to NO, the detailed description appears after the member
160 # documentation.
161
162 DETAILS_AT_TOP = NO
163
164 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
165 # member inherits the documentation from any documented member that it
166 # re-implements.
167
168 INHERIT_DOCS = YES
169
170 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
171 # a new page for each member. If set to NO, the documentation of a member will
172 # be part of the file/class/namespace that contains it.
173
174 SEPARATE_MEMBER_PAGES = NO
175
176 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
177 # Doxygen uses this value to replace tabs by spaces in code fragments.
178
179 TAB_SIZE = 8
180
181 # This tag can be used to specify a number of aliases that acts
182 # as commands in the documentation. An alias has the form "name=value".
183 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
184 # put the command \sideeffect (or @sideeffect) in the documentation, which
185 # will result in a user-defined paragraph with heading "Side Effects:".
186 # You can put \n's in the value part of an alias to insert newlines.
187
188 ALIASES =
189
190 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
191 # sources only. Doxygen will then generate output that is more tailored for C.
192 # For instance, some of the names that are used will be different. The list
193 # of all members will be omitted, etc.
194
195 OPTIMIZE_OUTPUT_FOR_C = YES
196
197 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
198 # sources only. Doxygen will then generate output that is more tailored for Java.
199 # For instance, namespaces will be presented as packages, qualified scopes
200 # will look different, etc.
201
202 OPTIMIZE_OUTPUT_JAVA = NO
203
204 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
205 # include (a tag file for) the STL sources as input, then you should
206 # set this tag to YES in order to let doxygen match functions declarations and
207 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
208 # func(std::string) {}). This also make the inheritance and collaboration
209 # diagrams that involve STL classes more complete and accurate.
210
211 BUILTIN_STL_SUPPORT = NO
212
213 # If you use Microsoft's C++/CLI language, you should set this option to YES to
214 # enable parsing support.
215
216 CPP_CLI_SUPPORT = NO
217
218 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
219 # tag is set to YES, then doxygen will reuse the documentation of the first
220 # member in the group (if any) for the other members of the group. By default
221 # all members of a group must be documented explicitly.
222
223 DISTRIBUTE_GROUP_DOC = NO
224
225 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
226 # the same type (for instance a group of public functions) to be put as a
227 # subgroup of that type (e.g. under the Public Functions section). Set it to
228 # NO to prevent subgrouping. Alternatively, this can be done per class using
229 # the \nosubgrouping command.
230
231 SUBGROUPING = YES
232
233 #---------------------------------------------------------------------------
234 # Build related configuration options
235 #---------------------------------------------------------------------------
236
237 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
238 # documentation are documented, even if no documentation was available.
239 # Private class members and static file members will be hidden unless
240 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
241
242 EXTRACT_ALL = YES
243
244 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
245 # will be included in the documentation.
246
247 EXTRACT_PRIVATE = NO
248
249 # If the EXTRACT_STATIC tag is set to YES all static members of a file
250 # will be included in the documentation.
251
252 EXTRACT_STATIC = NO
253
254 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
255 # defined locally in source files will be included in the documentation.
256 # If set to NO only classes defined in header files are included.
257
258 EXTRACT_LOCAL_CLASSES = YES
259
260 # This flag is only useful for Objective-C code. When set to YES local
261 # methods, which are defined in the implementation section but not in
262 # the interface are included in the documentation.
263 # If set to NO (the default) only methods in the interface are included.
264
265 EXTRACT_LOCAL_METHODS = NO
266
267 # If this flag is set to YES, the members of anonymous namespaces will be extracted
268 # and appear in the documentation as a namespace called 'anonymous_namespace{file}',
269 # where file will be replaced with the base name of the file that contains the anonymous
270 # namespace. By default anonymous namespace are hidden.
271
272 EXTRACT_ANON_NSPACES = NO
273
274 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
275 # undocumented members of documented classes, files or namespaces.
276 # If set to NO (the default) these members will be included in the
277 # various overviews, but no documentation section is generated.
278 # This option has no effect if EXTRACT_ALL is enabled.
279
280 HIDE_UNDOC_MEMBERS = NO
281
282 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
283 # undocumented classes that are normally visible in the class hierarchy.
284 # If set to NO (the default) these classes will be included in the various
285 # overviews. This option has no effect if EXTRACT_ALL is enabled.
286
287 HIDE_UNDOC_CLASSES = NO
288
289 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
290 # friend (class|struct|union) declarations.
291 # If set to NO (the default) these declarations will be included in the
292 # documentation.
293
294 HIDE_FRIEND_COMPOUNDS = NO
295
296 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
297 # documentation blocks found inside the body of a function.
298 # If set to NO (the default) these blocks will be appended to the
299 # function's detailed documentation block.
300
301 HIDE_IN_BODY_DOCS = NO
302
303 # The INTERNAL_DOCS tag determines if documentation
304 # that is typed after a \internal command is included. If the tag is set
305 # to NO (the default) then the documentation will be excluded.
306 # Set it to YES to include the internal documentation.
307
308 INTERNAL_DOCS = NO
309
310 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
311 # file names in lower-case letters. If set to YES upper-case letters are also
312 # allowed. This is useful if you have classes or files whose names only differ
313 # in case and if your file system supports case sensitive file names. Windows
314 # and Mac users are advised to set this option to NO.
315
316 CASE_SENSE_NAMES = YES
317
318 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
319 # will show members with their full class and namespace scopes in the
320 # documentation. If set to YES the scope will be hidden.
321
322 HIDE_SCOPE_NAMES = YES
323
324 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
325 # will put a list of the files that are included by a file in the documentation
326 # of that file.
327
328 SHOW_INCLUDE_FILES = YES
329
330 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
331 # is inserted in the documentation for inline members.
332
333 INLINE_INFO = YES
334
335 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
336 # will sort the (detailed) documentation of file and class members
337 # alphabetically by member name. If set to NO the members will appear in
338 # declaration order.
339
340 SORT_MEMBER_DOCS = NO
341
342 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
343 # brief documentation of file, namespace and class members alphabetically
344 # by member name. If set to NO (the default) the members will appear in
345 # declaration order.
346
347 SORT_BRIEF_DOCS = NO
348
349 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
350 # sorted by fully-qualified names, including namespaces. If set to
351 # NO (the default), the class list will be sorted only by class name,
352 # not including the namespace part.
353 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
354 # Note: This option applies only to the class list, not to the
355 # alphabetical list.
356
357 SORT_BY_SCOPE_NAME = NO
358
359 # The GENERATE_TODOLIST tag can be used to enable (YES) or
360 # disable (NO) the todo list. This list is created by putting \todo
361 # commands in the documentation.
362
363 GENERATE_TODOLIST = YES
364
365 # The GENERATE_TESTLIST tag can be used to enable (YES) or
366 # disable (NO) the test list. This list is created by putting \test
367 # commands in the documentation.
368
369 GENERATE_TESTLIST = YES
370
371 # The GENERATE_BUGLIST tag can be used to enable (YES) or
372 # disable (NO) the bug list. This list is created by putting \bug
373 # commands in the documentation.
374
375 GENERATE_BUGLIST = YES
376
377 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
378 # disable (NO) the deprecated list. This list is created by putting
379 # \deprecated commands in the documentation.
380
381 GENERATE_DEPRECATEDLIST= YES
382
383 # The ENABLED_SECTIONS tag can be used to enable conditional
384 # documentation sections, marked by \if sectionname ... \endif.
385
386 ENABLED_SECTIONS =
387
388 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
389 # the initial value of a variable or define consists of for it to appear in
390 # the documentation. If the initializer consists of more lines than specified
391 # here it will be hidden. Use a value of 0 to hide initializers completely.
392 # The appearance of the initializer of individual variables and defines in the
393 # documentation can be controlled using \showinitializer or \hideinitializer
394 # command in the documentation regardless of this setting.
395
396 MAX_INITIALIZER_LINES = 30
397
398 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
399 # at the bottom of the documentation of classes and structs. If set to YES the
400 # list will mention the files that were used to generate the documentation.
401
402 SHOW_USED_FILES = YES
403
404 # If the sources in your project are distributed over multiple directories
405 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
406 # in the documentation. The default is NO.
407
408 SHOW_DIRECTORIES = NO
409
410 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
411 # doxygen should invoke to get the current version for each file (typically from the
412 # version control system). Doxygen will invoke the program by executing (via
413 # popen()) the command <command> <input-file>, where <command> is the value of
414 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
415 # provided by doxygen. Whatever the program writes to standard output
416 # is used as the file version. See the manual for examples.
417
418 FILE_VERSION_FILTER =
419
420 #---------------------------------------------------------------------------
421 # configuration options related to warning and progress messages
422 #---------------------------------------------------------------------------
423
424 # The QUIET tag can be used to turn on/off the messages that are generated
425 # by doxygen. Possible values are YES and NO. If left blank NO is used.
426
427 QUIET = YES
428
429 # The WARNINGS tag can be used to turn on/off the warning messages that are
430 # generated by doxygen. Possible values are YES and NO. If left blank
431 # NO is used.
432
433 WARNINGS = YES
434
435 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
436 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
437 # automatically be disabled.
438
439 WARN_IF_UNDOCUMENTED = YES
440
441 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
442 # potential errors in the documentation, such as not documenting some
443 # parameters in a documented function, or documenting parameters that
444 # don't exist or using markup commands wrongly.
445
446 WARN_IF_DOC_ERROR = YES
447
448 # This WARN_NO_PARAMDOC option can be abled to get warnings for
449 # functions that are documented, but have no documentation for their parameters
450 # or return value. If set to NO (the default) doxygen will only warn about
451 # wrong or incomplete parameter documentation, but not about the absence of
452 # documentation.
453
454 WARN_NO_PARAMDOC = YES
455
456 # The WARN_FORMAT tag determines the format of the warning messages that
457 # doxygen can produce. The string should contain the $file, $line, and $text
458 # tags, which will be replaced by the file and line number from which the
459 # warning originated and the warning text. Optionally the format may contain
460 # $version, which will be replaced by the version of the file (if it could
461 # be obtained via FILE_VERSION_FILTER)
462
463 WARN_FORMAT = "$file:$line: $text "
464
465 # The WARN_LOGFILE tag can be used to specify a file to which warning
466 # and error messages should be written. If left blank the output is written
467 # to stderr.
468
469 WARN_LOGFILE =
470
471 #---------------------------------------------------------------------------
472 # configuration options related to the input files
473 #---------------------------------------------------------------------------
474
475 # The INPUT tag can be used to specify the files and/or directories that contain
476 # documented source files. You may enter file names like "myfile.cpp" or
477 # directories like "/usr/src/myproject". Separate the files or directories
478 # with spaces.
479
480 INPUT = .
481
482 # This tag can be used to specify the character encoding of the source files that
483 # doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default
484 # input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding.
485 # See http://www.gnu.org/software/libiconv for the list of possible encodings.
486
487 INPUT_ENCODING = UTF-8
488
489 # If the value of the INPUT tag contains directories, you can use the
490 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
491 # and *.h) to filter out the source-files in the directories. If left
492 # blank the following patterns are tested:
493 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
494 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
495
496 FILE_PATTERNS = *.c \
497 *.h
498
499 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
500 # should be searched for input files as well. Possible values are YES and NO.
501 # If left blank NO is used.
502
503 RECURSIVE = NO
504
505 # The EXCLUDE tag can be used to specify files and/or directories that should
506 # excluded from the INPUT source files. This way you can easily exclude a
507 # subdirectory from a directory tree whose root is specified with the INPUT tag.
508
509 EXCLUDE = error2.h
510
511 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
512 # directories that are symbolic links (a Unix filesystem feature) are excluded
513 # from the input.
514
515 EXCLUDE_SYMLINKS = NO
516
517 # If the value of the INPUT tag contains directories, you can use the
518 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
519 # certain files from those directories. Note that the wildcards are matched
520 # against the file with absolute path, so to exclude all test directories
521 # for example use the pattern */test/*
522
523 EXCLUDE_PATTERNS = *.cmdline.* \
524 gui* \
525 gcc-compat.h \
526 fade.c \
527 config.h
528
529 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
530 # (namespaces, classes, functions, etc.) that should be excluded from the output.
531 # The symbol name can be a fully qualified name, a word, or if the wildcard * is used,
532 # a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test
533
534 EXCLUDE_SYMBOLS =
535
536 # The EXAMPLE_PATH tag can be used to specify one or more files or
537 # directories that contain example code fragments that are included (see
538 # the \include command).
539
540 EXAMPLE_PATH =
541
542 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
543 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
544 # and *.h) to filter out the source-files in the directories. If left
545 # blank all files are included.
546
547 EXAMPLE_PATTERNS =
548
549 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
550 # searched for input files to be used with the \include or \dontinclude
551 # commands irrespective of the value of the RECURSIVE tag.
552 # Possible values are YES and NO. If left blank NO is used.
553
554 EXAMPLE_RECURSIVE = NO
555
556 # The IMAGE_PATH tag can be used to specify one or more files or
557 # directories that contain image that are included in the documentation (see
558 # the \image command).
559
560 IMAGE_PATH =
561
562 # The INPUT_FILTER tag can be used to specify a program that doxygen should
563 # invoke to filter for each input file. Doxygen will invoke the filter program
564 # by executing (via popen()) the command <filter> <input-file>, where <filter>
565 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
566 # input file. Doxygen will then use the output that the filter program writes
567 # to standard output. If FILTER_PATTERNS is specified, this tag will be
568 # ignored.
569
570 INPUT_FILTER =
571
572 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
573 # basis. Doxygen will compare the file name with each pattern and apply the
574 # filter if there is a match. The filters are a list of the form:
575 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
576 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
577 # is applied to all files.
578
579 FILTER_PATTERNS =
580
581 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
582 # INPUT_FILTER) will be used to filter the input files when producing source
583 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
584
585 FILTER_SOURCE_FILES = NO
586
587 #---------------------------------------------------------------------------
588 # configuration options related to source browsing
589 #---------------------------------------------------------------------------
590
591 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
592 # be generated. Documented entities will be cross-referenced with these sources.
593 # Note: To get rid of all source code in the generated output, make sure also
594 # VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH
595 # then you must also enable this option. If you don't then doxygen will produce
596 # a warning and turn it on anyway
597
598 SOURCE_BROWSER = YES
599
600 # Setting the INLINE_SOURCES tag to YES will include the body
601 # of functions and classes directly in the documentation.
602
603 INLINE_SOURCES = NO
604
605 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
606 # doxygen to hide any special comment blocks from generated source code
607 # fragments. Normal C and C++ comments will always remain visible.
608
609 STRIP_CODE_COMMENTS = YES
610
611 # If the REFERENCED_BY_RELATION tag is set to YES (the default)
612 # then for each documented function all documented
613 # functions referencing it will be listed.
614
615 REFERENCED_BY_RELATION = YES
616
617 # If the REFERENCES_RELATION tag is set to YES (the default)
618 # then for each documented function all documented entities
619 # called/used by that function will be listed.
620
621 REFERENCES_RELATION = YES
622
623 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
624 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
625 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
626 # link to the source code. Otherwise they will link to the documentstion.
627
628 REFERENCES_LINK_SOURCE = YES
629
630 # If the USE_HTAGS tag is set to YES then the references to source code
631 # will point to the HTML generated by the htags(1) tool instead of doxygen
632 # built-in source browser. The htags tool is part of GNU's global source
633 # tagging system (see http://www.gnu.org/software/global/global.html). You
634 # will need version 4.8.6 or higher.
635
636 USE_HTAGS = YES
637
638 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
639 # will generate a verbatim copy of the header file for each class for
640 # which an include is specified. Set to NO to disable this.
641
642 VERBATIM_HEADERS = YES
643
644 #---------------------------------------------------------------------------
645 # configuration options related to the alphabetical class index
646 #---------------------------------------------------------------------------
647
648 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
649 # of all compounds will be generated. Enable this if the project
650 # contains a lot of classes, structs, unions or interfaces.
651
652 ALPHABETICAL_INDEX = NO
653
654 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
655 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
656 # in which this list will be split (can be a number in the range [1..20])
657
658 COLS_IN_ALPHA_INDEX = 5
659
660 # In case all classes in a project start with a common prefix, all
661 # classes will be put under the same header in the alphabetical index.
662 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
663 # should be ignored while generating the index headers.
664
665 IGNORE_PREFIX =
666
667 #---------------------------------------------------------------------------
668 # configuration options related to the HTML output
669 #---------------------------------------------------------------------------
670
671 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
672 # generate HTML output.
673
674 GENERATE_HTML = YES
675
676 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
677 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
678 # put in front of it. If left blank `html' will be used as the default path.
679
680 HTML_OUTPUT = html
681
682 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
683 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
684 # doxygen will generate files with .html extension.
685
686 HTML_FILE_EXTENSION = .html
687
688 # The HTML_HEADER tag can be used to specify a personal HTML header for
689 # each generated HTML page. If it is left blank doxygen will generate a
690 # standard header.
691
692 HTML_HEADER = web/header2.html
693
694 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
695 # each generated HTML page. If it is left blank doxygen will generate a
696 # standard footer.
697
698 HTML_FOOTER = web/footer.html
699
700 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
701 # style sheet that is used by each HTML page. It can be used to
702 # fine-tune the look of the HTML output. If the tag is left blank doxygen
703 # will generate a default style sheet. Note that doxygen will try to copy
704 # the style sheet file to the HTML output directory, so don't put your own
705 # stylesheet in the HTML output directory as well, or it will be erased!
706
707 HTML_STYLESHEET =
708
709 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
710 # files or namespaces will be aligned in HTML using tables. If set to
711 # NO a bullet list will be used.
712
713 HTML_ALIGN_MEMBERS = YES
714
715 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
716 # will be generated that can be used as input for tools like the
717 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
718 # of the generated HTML documentation.
719
720 GENERATE_HTMLHELP = NO
721
722 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
723 # documentation will contain sections that can be hidden and shown after the
724 # page has loaded. For this to work a browser that supports
725 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
726 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
727
728 HTML_DYNAMIC_SECTIONS = NO
729
730 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
731 # be used to specify the file name of the resulting .chm file. You
732 # can add a path in front of the file if the result should not be
733 # written to the html output directory.
734
735 CHM_FILE =
736
737 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
738 # be used to specify the location (absolute path including file name) of
739 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
740 # the HTML help compiler on the generated index.hhp.
741
742 HHC_LOCATION =
743
744 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
745 # controls if a separate .chi index file is generated (YES) or that
746 # it should be included in the master .chm file (NO).
747
748 GENERATE_CHI = NO
749
750 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
751 # controls whether a binary table of contents is generated (YES) or a
752 # normal table of contents (NO) in the .chm file.
753
754 BINARY_TOC = NO
755
756 # The TOC_EXPAND flag can be set to YES to add extra items for group members
757 # to the contents of the HTML help documentation and to the tree view.
758
759 TOC_EXPAND = NO
760
761 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
762 # top of each HTML page. The value NO (the default) enables the index and
763 # the value YES disables it.
764
765 DISABLE_INDEX = NO
766
767 # This tag can be used to set the number of enum values (range [1..20])
768 # that doxygen will group on one line in the generated HTML documentation.
769
770 ENUM_VALUES_PER_LINE = 4
771
772 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
773 # generated containing a tree-like index structure (just like the one that
774 # is generated for HTML Help). For this to work a browser that supports
775 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
776 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
777 # probably better off using the HTML help feature.
778
779 GENERATE_TREEVIEW = NO
780
781 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
782 # used to set the initial width (in pixels) of the frame in which the tree
783 # is shown.
784
785 TREEVIEW_WIDTH = 250
786
787 #---------------------------------------------------------------------------
788 # configuration options related to the LaTeX output
789 #---------------------------------------------------------------------------
790
791 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
792 # generate Latex output.
793
794 GENERATE_LATEX = NO
795
796 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
797 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
798 # put in front of it. If left blank `latex' will be used as the default path.
799
800 LATEX_OUTPUT = latex
801
802 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
803 # invoked. If left blank `latex' will be used as the default command name.
804
805 LATEX_CMD_NAME = latex
806
807 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
808 # generate index for LaTeX. If left blank `makeindex' will be used as the
809 # default command name.
810
811 MAKEINDEX_CMD_NAME = makeindex
812
813 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
814 # LaTeX documents. This may be useful for small projects and may help to
815 # save some trees in general.
816
817 COMPACT_LATEX = NO
818
819 # The PAPER_TYPE tag can be used to set the paper type that is used
820 # by the printer. Possible values are: a4, a4wide, letter, legal and
821 # executive. If left blank a4wide will be used.
822
823 PAPER_TYPE = a4wide
824
825 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
826 # packages that should be included in the LaTeX output.
827
828 EXTRA_PACKAGES =
829
830 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
831 # the generated latex document. The header should contain everything until
832 # the first chapter. If it is left blank doxygen will generate a
833 # standard header. Notice: only use this tag if you know what you are doing!
834
835 LATEX_HEADER =
836
837 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
838 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
839 # contain links (just like the HTML output) instead of page references
840 # This makes the output suitable for online browsing using a pdf viewer.
841
842 PDF_HYPERLINKS = NO
843
844 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
845 # plain latex in the generated Makefile. Set this option to YES to get a
846 # higher quality PDF documentation.
847
848 USE_PDFLATEX = NO
849
850 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
851 # command to the generated LaTeX files. This will instruct LaTeX to keep
852 # running if errors occur, instead of asking the user for help.
853 # This option is also used when generating formulas in HTML.
854
855 LATEX_BATCHMODE = NO
856
857 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
858 # include the index chapters (such as File Index, Compound Index, etc.)
859 # in the output.
860
861 LATEX_HIDE_INDICES = NO
862
863 #---------------------------------------------------------------------------
864 # configuration options related to the RTF output
865 #---------------------------------------------------------------------------
866
867 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
868 # The RTF output is optimized for Word 97 and may not look very pretty with
869 # other RTF readers or editors.
870
871 GENERATE_RTF = NO
872
873 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
874 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
875 # put in front of it. If left blank `rtf' will be used as the default path.
876
877 RTF_OUTPUT = rtf
878
879 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
880 # RTF documents. This may be useful for small projects and may help to
881 # save some trees in general.
882
883 COMPACT_RTF = NO
884
885 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
886 # will contain hyperlink fields. The RTF file will
887 # contain links (just like the HTML output) instead of page references.
888 # This makes the output suitable for online browsing using WORD or other
889 # programs which support those fields.
890 # Note: wordpad (write) and others do not support links.
891
892 RTF_HYPERLINKS = NO
893
894 # Load stylesheet definitions from file. Syntax is similar to doxygen's
895 # config file, i.e. a series of assignments. You only have to provide
896 # replacements, missing definitions are set to their default value.
897
898 RTF_STYLESHEET_FILE =
899
900 # Set optional variables used in the generation of an rtf document.
901 # Syntax is similar to doxygen's config file.
902
903 RTF_EXTENSIONS_FILE =
904
905 #---------------------------------------------------------------------------
906 # configuration options related to the man page output
907 #---------------------------------------------------------------------------
908
909 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
910 # generate man pages
911
912 GENERATE_MAN = NO
913
914 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
915 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
916 # put in front of it. If left blank `man' will be used as the default path.
917
918 MAN_OUTPUT = man
919
920 # The MAN_EXTENSION tag determines the extension that is added to
921 # the generated man pages (default is the subroutine's section .3)
922
923 MAN_EXTENSION = .3
924
925 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
926 # then it will generate one additional man file for each entity
927 # documented in the real man page(s). These additional files
928 # only source the real man page, but without them the man command
929 # would be unable to find the correct page. The default is NO.
930
931 MAN_LINKS = NO
932
933 #---------------------------------------------------------------------------
934 # configuration options related to the XML output
935 #---------------------------------------------------------------------------
936
937 # If the GENERATE_XML tag is set to YES Doxygen will
938 # generate an XML file that captures the structure of
939 # the code including all documentation.
940
941 GENERATE_XML = NO
942
943 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
944 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
945 # put in front of it. If left blank `xml' will be used as the default path.
946
947 XML_OUTPUT = xml
948
949 # The XML_SCHEMA tag can be used to specify an XML schema,
950 # which can be used by a validating XML parser to check the
951 # syntax of the XML files.
952
953 XML_SCHEMA =
954
955 # The XML_DTD tag can be used to specify an XML DTD,
956 # which can be used by a validating XML parser to check the
957 # syntax of the XML files.
958
959 XML_DTD =
960
961 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
962 # dump the program listings (including syntax highlighting
963 # and cross-referencing information) to the XML output. Note that
964 # enabling this will significantly increase the size of the XML output.
965
966 XML_PROGRAMLISTING = YES
967
968 #---------------------------------------------------------------------------
969 # configuration options for the AutoGen Definitions output
970 #---------------------------------------------------------------------------
971
972 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
973 # generate an AutoGen Definitions (see autogen.sf.net) file
974 # that captures the structure of the code including all
975 # documentation. Note that this feature is still experimental
976 # and incomplete at the moment.
977
978 GENERATE_AUTOGEN_DEF = NO
979
980 #---------------------------------------------------------------------------
981 # configuration options related to the Perl module output
982 #---------------------------------------------------------------------------
983
984 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
985 # generate a Perl module file that captures the structure of
986 # the code including all documentation. Note that this
987 # feature is still experimental and incomplete at the
988 # moment.
989
990 GENERATE_PERLMOD = NO
991
992 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
993 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
994 # to generate PDF and DVI output from the Perl module output.
995
996 PERLMOD_LATEX = NO
997
998 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
999 # nicely formatted so it can be parsed by a human reader. This is useful
1000 # if you want to understand what is going on. On the other hand, if this
1001 # tag is set to NO the size of the Perl module output will be much smaller
1002 # and Perl will parse it just the same.
1003
1004 PERLMOD_PRETTY = YES
1005
1006 # The names of the make variables in the generated doxyrules.make file
1007 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1008 # This is useful so different doxyrules.make files included by the same
1009 # Makefile don't overwrite each other's variables.
1010
1011 PERLMOD_MAKEVAR_PREFIX =
1012
1013 #---------------------------------------------------------------------------
1014 # Configuration options related to the preprocessor
1015 #---------------------------------------------------------------------------
1016
1017 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1018 # evaluate all C-preprocessor directives found in the sources and include
1019 # files.
1020
1021 ENABLE_PREPROCESSING = YES
1022
1023 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1024 # names in the source code. If set to NO (the default) only conditional
1025 # compilation will be performed. Macro expansion can be done in a controlled
1026 # way by setting EXPAND_ONLY_PREDEF to YES.
1027
1028 MACRO_EXPANSION = NO
1029
1030 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1031 # then the macro expansion is limited to the macros specified with the
1032 # PREDEFINED and EXPAND_AS_DEFINED tags.
1033
1034 EXPAND_ONLY_PREDEF = NO
1035
1036 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1037 # in the INCLUDE_PATH (see below) will be search if a #include is found.
1038
1039 SEARCH_INCLUDES = YES
1040
1041 # The INCLUDE_PATH tag can be used to specify one or more directories that
1042 # contain include files that are not input files but should be processed by
1043 # the preprocessor.
1044
1045 INCLUDE_PATH =
1046
1047 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1048 # patterns (like *.h and *.hpp) to filter out the header-files in the
1049 # directories. If left blank, the patterns specified with FILE_PATTERNS will
1050 # be used.
1051
1052 INCLUDE_FILE_PATTERNS =
1053
1054 # The PREDEFINED tag can be used to specify one or more macro names that
1055 # are defined before the preprocessor is started (similar to the -D option of
1056 # gcc). The argument of the tag is a list of macros of the form: name
1057 # or name=definition (no spaces). If the definition and the = are
1058 # omitted =1 is assumed. To prevent a macro definition from being
1059 # undefined via #undef or recursively expanded use the := operator
1060 # instead of the = operator.
1061
1062 PREDEFINED = HAVE_MAD \
1063 HAVE_FAAD \
1064 HAVE_OGGVORBIS \
1065 __GNUC__=4 \
1066 __GNUC_MINOR__=4
1067
1068 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1069 # this tag can be used to specify a list of macro names that should be expanded.
1070 # The macro definition that is found in the sources will be used.
1071 # Use the PREDEFINED tag if you want to use a different macro definition.
1072
1073 EXPAND_AS_DEFINED =
1074
1075 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1076 # doxygen's preprocessor will remove all function-like macros that are alone
1077 # on a line, have an all uppercase name, and do not end with a semicolon. Such
1078 # function macros are typically used for boiler-plate code, and will confuse
1079 # the parser if not removed.
1080
1081 SKIP_FUNCTION_MACROS = YES
1082
1083 #---------------------------------------------------------------------------
1084 # Configuration::additions related to external references
1085 #---------------------------------------------------------------------------
1086
1087 # The TAGFILES option can be used to specify one or more tagfiles.
1088 # Optionally an initial location of the external documentation
1089 # can be added for each tagfile. The format of a tag file without
1090 # this location is as follows:
1091 # TAGFILES = file1 file2 ...
1092 # Adding location for the tag files is done as follows:
1093 # TAGFILES = file1=loc1 "file2 = loc2" ...
1094 # where "loc1" and "loc2" can be relative or absolute paths or
1095 # URLs. If a location is present for each tag, the installdox tool
1096 # does not have to be run to correct the links.
1097 # Note that each tag file must have a unique name
1098 # (where the name does NOT include the path)
1099 # If a tag file is not located in the directory in which doxygen
1100 # is run, you must also specify the path to the tagfile here.
1101
1102 TAGFILES =
1103
1104 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
1105 # a tag file that is based on the input files it reads.
1106
1107 GENERATE_TAGFILE =
1108
1109 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
1110 # in the class index. If set to NO only the inherited external classes
1111 # will be listed.
1112
1113 ALLEXTERNALS = NO
1114
1115 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1116 # in the modules index. If set to NO, only the current project's groups will
1117 # be listed.
1118
1119 EXTERNAL_GROUPS = YES
1120
1121 # The PERL_PATH should be the absolute path and name of the perl script
1122 # interpreter (i.e. the result of `which perl').
1123
1124 PERL_PATH = /usr/bin/perl
1125
1126 #---------------------------------------------------------------------------
1127 # Configuration options related to the dot tool
1128 #---------------------------------------------------------------------------
1129
1130 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1131 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1132 # or super classes. Setting the tag to NO turns the diagrams off. Note that
1133 # this option is superseded by the HAVE_DOT option below. This is only a
1134 # fallback. It is recommended to install and use dot, since it yields more
1135 # powerful graphs.
1136
1137 CLASS_DIAGRAMS = YES
1138
1139 # You can define message sequence charts within doxygen comments using the \msc
1140 # command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to
1141 # produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to
1142 # specify the directory where the mscgen tool resides. If left empty the tool is assumed to
1143 # be found in the default search path.
1144
1145 MSCGEN_PATH =
1146
1147 # If set to YES, the inheritance and collaboration graphs will hide
1148 # inheritance and usage relations if the target is undocumented
1149 # or is not a class.
1150
1151 HIDE_UNDOC_RELATIONS = YES
1152
1153 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1154 # available from the path. This tool is part of Graphviz, a graph visualization
1155 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1156 # have no effect if this option is set to NO (the default)
1157
1158 HAVE_DOT = NO
1159
1160 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1161 # will generate a graph for each documented class showing the direct and
1162 # indirect inheritance relations. Setting this tag to YES will force the
1163 # the CLASS_DIAGRAMS tag to NO.
1164
1165 CLASS_GRAPH = YES
1166
1167 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1168 # will generate a graph for each documented class showing the direct and
1169 # indirect implementation dependencies (inheritance, containment, and
1170 # class references variables) of the class with other documented classes.
1171
1172 COLLABORATION_GRAPH = YES
1173
1174 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1175 # will generate a graph for groups, showing the direct groups dependencies
1176
1177 GROUP_GRAPHS = YES
1178
1179 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1180 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1181 # Language.
1182
1183 UML_LOOK = NO
1184
1185 # If set to YES, the inheritance and collaboration graphs will show the
1186 # relations between templates and their instances.
1187
1188 TEMPLATE_RELATIONS = NO
1189
1190 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1191 # tags are set to YES then doxygen will generate a graph for each documented
1192 # file showing the direct and indirect include dependencies of the file with
1193 # other documented files.
1194
1195 INCLUDE_GRAPH = YES
1196
1197 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1198 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1199 # documented header file showing the documented files that directly or
1200 # indirectly include this file.
1201
1202 INCLUDED_BY_GRAPH = YES
1203
1204 # If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will
1205 # generate a call dependency graph for every global function or class method.
1206 # Note that enabling this option will significantly increase the time of a run.
1207 # So in most cases it will be better to enable call graphs for selected
1208 # functions only using the \callgraph command.
1209
1210 CALL_GRAPH = NO
1211
1212 # If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will
1213 # generate a caller dependency graph for every global function or class method.
1214 # Note that enabling this option will significantly increase the time of a run.
1215 # So in most cases it will be better to enable caller graphs for selected
1216 # functions only using the \callergraph command.
1217
1218 CALLER_GRAPH = NO
1219
1220 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1221 # will graphical hierarchy of all classes instead of a textual one.
1222
1223 GRAPHICAL_HIERARCHY = YES
1224
1225 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1226 # then doxygen will show the dependencies a directory has on other directories
1227 # in a graphical way. The dependency relations are determined by the #include
1228 # relations between the files in the directories.
1229
1230 DIRECTORY_GRAPH = YES
1231
1232 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1233 # generated by dot. Possible values are png, jpg, or gif
1234 # If left blank png will be used.
1235
1236 DOT_IMAGE_FORMAT = png
1237
1238 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1239 # found. If left blank, it is assumed the dot tool can be found in the path.
1240
1241 DOT_PATH =
1242
1243 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1244 # contain dot files that are included in the documentation (see the
1245 # \dotfile command).
1246
1247 DOTFILE_DIRS =
1248
1249 # The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1250 # nodes that will be shown in the graph. If the number of nodes in a graph
1251 # becomes larger than this value, doxygen will truncate the graph, which is
1252 # visualized by representing a node as a red box. Note that doxygen if the number
1253 # of direct children of the root node in a graph is already larger than
1254 # MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note
1255 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1256
1257 DOT_GRAPH_MAX_NODES = 50
1258
1259 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1260 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1261 # from the root by following a path via at most 3 edges will be shown. Nodes
1262 # that lay further from the root node will be omitted. Note that setting this
1263 # option to 1 or 2 may greatly reduce the computation time needed for large
1264 # code bases. Also note that the size of a graph can be further restricted by
1265 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1266
1267 MAX_DOT_GRAPH_DEPTH = 0
1268
1269 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1270 # background. This is disabled by default, which results in a white background.
1271 # Warning: Depending on the platform used, enabling this option may lead to
1272 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
1273 # read).
1274
1275 DOT_TRANSPARENT = NO
1276
1277 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1278 # files in one run (i.e. multiple -o and -T options on the command line). This
1279 # makes dot run faster, but since only newer versions of dot (>1.8.10)
1280 # support this, this feature is disabled by default.
1281
1282 DOT_MULTI_TARGETS = NO
1283
1284 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1285 # generate a legend page explaining the meaning of the various boxes and
1286 # arrows in the dot generated graphs.
1287
1288 GENERATE_LEGEND = YES
1289
1290 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1291 # remove the intermediate dot files that are used to generate
1292 # the various graphs.
1293
1294 DOT_CLEANUP = YES
1295
1296 #---------------------------------------------------------------------------
1297 # Configuration::additions related to the search engine
1298 #---------------------------------------------------------------------------
1299
1300 # The SEARCHENGINE tag specifies whether or not a search engine should be
1301 # used. If set to NO the values of all tags below this one will be ignored.
1302
1303 SEARCHENGINE = YES